Epoxy Waterproofing Materials and More
Most Epoxy.com products can be used for waterproofing
Epoxy Gel Adhesives as Waterproofing
One big advantage of using a gel adhesive as a waterproofing system is that it goes on thick. These materials are the
consistency of peanut butter, so you can build a thick layer exactly where you need it
- Epoxy.com Product #5 Fast Set Gel
Waterproof Adhesive is a 100% solids high-mod epoxy waterproof gel
adhesive used for vertical and overhead waterproofing applications and structural repairs. It is also used as a grout for anchor bolts, dowels and rebar.
Epoxy.com Product #5 Fast Setting Gel Waterproofing Adhesive is used when you
need a fast set epoxy with a quick turn around time.
- Epoxy.com Product#6 Gel - Normal Setting
Waterproof Adhesive is a high-mod epoxy gel waterproofing adhesive used for vertical and overhead
waterproofing, bonding applications and structural repairs. It is also used as a grout for anchor bolts, dowels and rebar.
Epoxy.com Product #6 normal setting waterproofing gel adhesive balances decent
potlife with a reasonable cure time.
- Epoxy.com Product #6SC Long Pot life Adhesive produces a non-sagging material that is ideal for repairs on vertical or overhead surfaces. PRODUCT #6SC meets or exceeds the requirements of ASTM - C881-87, Types I, II, and IV, Grade 3 Class "B" and "C".
If you need to do the job of Epoxy.com Product #5 or Epoxy.com Product #6,
but need a longer working time, this is the product.
- Epoxy.com Product #703
Semi-Flexible Gel Waterproof Adhesive is a non-sagging material that is ideal for repairs on vertical or overhead surfaces. It exceeds the requirements of ASTM C 881-87, Types I, II, and III Grade 3, Class "B", "C", "E" and "F".
The flexibility of the Epoxy.com Product #703 Semi-Flexible Gel
Waterproofing Adhesive makes it ideal for waterproofing areas
where some movement is anticipated, like block walls, and block
- Epoxy.com Product #704 Emergency
Waterproof Epoxy is a rapid setting, two component, 1:1 ratio epoxy adhesive. It sets in six minutes and can be put into service in one hour regardless of temperature. It was designed to bond metals, glass, concrete and wood in a matter of minutes.
- Epoxy.com Product #705 Two Component Flexible
Waterproof Adhesive is a two component flexible adhesive, formulated to bond PVC and plastics to various substrates.
Epoxy.com Product #705 Two Component Flexible
Waterproof Adhesive will adhere plastics to other plastics,
concrete, steel, wood and masonry. Epoxy.com Product #705 Two Component Flexible
Waterproof Adhesive is thixotropic and is easily applied by serrated trowel.
- Epoxy.com Product #706 Heat Resistant Bonder/Mortar is a 100% solids, moisture insensitive
waterproof epoxy adhesive and waterproof epoxy repair material that is
an excellent choice when waterproofing . When A and B Components are mixed they produce a gel consistency similar to petroleum jelly, which will not sag or run on a vertical or overhead surface application,
forming a watertight, waterproof bond.
- Epoxy.com Product #707 Splash Zone & Under Water Epoxy
Paste is a moisture-insensitive, two-component, 100% solids
waterproof epoxy-resin system. When Product #707 Splash Zone & Under Water Epoxy is mixed at a 1:1 ratio, by volume, this product produces a paste-like material that is ideal for protection or restoration of concrete, steel and timber piles and other structural elements in marine environments.
This epoxy product is so waterproof, that it can be installed
- Epoxy.com Product #711 is
100% solids waterproof protective coating designed to provide cavitation, erosion and corrosion resistance to metallic and non-metallic surfaces.
Epoxy.com Product #711 acts as a barrier against extremely harsh environmental factors such as low and high PH, temperatures extremes, dry and fluid particulate flow and corrosive chemical attack.
Elastomeric Waterproofing Systems
Water Proofing Cracks, Joints and Pipe Penetrations
- Epoxy.com Product #4 Urethane Injection
is a one-component, "Acetone Free", MDI based hydrophilic sealing and grouting
compound used to stop water leaks in wet environments.
Epoxy.com Product #4 Urethane Injection, as it mixes
with existing water, cures rapidly into a tough, flexible, closed-cell compound
which is insoluble to water and most other chemicals.
- Product #420 Urethane Injection for Moisture. It reacts with water and expands to form an impermeable HYDROPHOBIC barrier. When reacted and hardened,
Product #420 Urethane Injection for Moisture. is insoluble to water and other aggressive chemicals.
- Epoxy Product #424 is a rigid two component closed cell foam impervious to water and moisture. It can be used where structural foam is needed to encapsulate waste or restore the physical properties of timber and other masonry materials.
- Epoxy.com Product #432 Low Viscosity Urethane Grout is a low viscosity, rapid gelling, hydrophobic grout.
Epoxy.com Product #432 Low Viscosity Urethane Grout is used to seal leaks in cracked concrete, for soil stabilization and for repairing leaking joints in structures. This all-purpose grout is easily mixed with water or stabilizer at a convenient 1 to 1 by volume mix ratio
- Epoxy.com Product #301 Injection Resin, low Modulus
- a 100% solids low viscosity epoxy adhesive used to restore cracked structural concrete by the pressure injection method and to grout cracks in a horizontal plane by gravity.
- Epoxy.com Product #301SC a longer Potlife version of
- Epoxy.com Product #301Cold a faster version of Product #301 typically used in Cold Temperature Cure applications, or where a very fast set is needed
- Epoxy.com Product #302 Injection
a 100% solids low viscosity moisture insensitive epoxy adhesive used to restore cracked structural concrete by the pressure injection method and to grout cracks in a horizontal plane by gravity.
- Epoxy.com Product #303 Low Viscosity
Epoxy Injection Resin a is a two component, 100% solids, moisture insensitive epoxy resin system, mixed at a 2:1 ratio, with a viscosity of light-weight oil. Product #303 exceeds the requirements of ASTM C 881-87, Types I, II, Grade 1, Class "B" and "C". Use neat for grouting damp and dry cracks or as a penetrating sealer on concrete, and wood. May also be mixed with Special Fillers (Products #72-75), to create epoxy mortars.
- Epoxy.com Product #304 Injection Resin and Mortar Binder is a moisture insensitive, two-component, 100% solids epoxy resin system designed specifically for use in temperatures of 40°F and below. It is recommended for injection or anchor-bolt grouting in the neat state or as a mortar when mixed with up to 3 1/4 parts of
Epoxy.com Product #75 Filler (by volume).
Epoxy.com Product #304 Injection Resin and Mortar Binder exceeds requirements of ASTM C-881-90, Types I, Grade 1, Class A.
Waterproof Joint Systems
See also: 100% solid Epoxy Coatings
Proper mixing and installation is critical to the optimal success
of all product. See
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
For more information please contact:
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Florida & Vermont
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
352-533-2167 Norm Lambert, President - Technical Support Director
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
352-489-1625 Fax line to all Departments
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
|| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers.|
Copyright © 1994-2013 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
other wise agreed upon in writing, buyer is responsible for the cost of
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Catalog of Products]
[Where to Start]
[Elastomeric Polyurethane Systems]
[Epoxy Resin Systems]
[Seamless Garage Floors]
[High Temperature Epoxy]
[Joint Systems / Sealants]
[Methyl Methacrylate (MMA)]
[Mortars / Grouts]
[Who We Are]
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]