Hydrophilic Sealing / Grouting Compound

OSVX3


DESCRIPTION

OSVX3 Hydrophilic Sealing and Grouting Compound is a one-component, "Acetone Free", MDI based hydrophilic sealing and grouting compound used to stop water leaks in wet environments. Hydrophilic Sealing and Grouting Compound, as it mixes with existing water, cures rapidly into a tough, flexible, closed-cell compound which is insoluble to water and most other chemicals.

ADVANTAGES

PHYSICAL PROPERTIES

Uncured Material

Color Amber
Viscosity (ASTM D 1638)
Reaction time <25 seconds
450 cps ± 100
Density 9.4 Lb. gal
Flash Point (ASTM D 93) >220°F
Expands on Reaction 7 times original volume

Cured Material

Tensile Strength (ASTM D 1564)   84 ±10 psi min.
Elongation (ASTM D 1564) 500% min.
Shrinkage - Linear <15 ± 3%
Corrosiveness Non-Corrosive
Toxicity Non Toxic when cured
Shelf Life 6 months
Cure TimeVaries, dependent upon accelerator added, ambient temperature, and temperatures of grouting compound.

Reaction and Set Times

 

Reaction

Set

Without accelerator @ 70°F 4 to 5 min. 6 to 8 minutes   
With accelerator @ 70°F 30 seconds     1 minute

HOW TO USE

OSVX3 Hydrophilic Sealing and Grouting Compound is used in many ways to stop water leaks.

PACKAGING

 Hydrophilic Sealing and Grouting Compound
 is available in 1 gallon, 5 gallon pails and 55 gallon drums.

Epoxy Verses Urethane Injection

 For more information see "Epoxy Injection or Urethane Injection, which is better?"

CAUTION

CAUTION:

Contains Toluene Diisocyanate prepolymer. Avoid breathing vapors. Keep container closed. Use only in well ventilated areas. Wear rubber gloves, safety glasses and protective clothing. Use NIOSH approved respirator in confined area. See MSDS for further safety precautions.

FOR INDUSTRIAL USE ONLY / KEEP AWAY FROM CHILDREN