High Temp Epoxy and High Temp Vinyl Ester
High Temperature Epoxy Coatings
Medium High Temperature Resistant Epoxy
- Epoxy.com Product #630 Novolac Coating/Mortar Binder - a 100% solids epoxy Novolac ideal for harsh chemical and solvent resistant applications. It is ideal for use as a troweled mortar, slurry binder, and coating for concrete and steel in extremely corrosive areas where resistance to 98% sulfuric acid or other strong caustics is needed. Epoxy.com Product #630 Novolac Coating/Mortar Binder is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities.
Zero (0) VOC Epoxy.
- Epoxy.com Product #632 Novolac Control Joint Filler is a 100% solids flexible Novolac epoxy Chemical Resistant joint filler for saw-cut joints of concrete slabs on grade.
Zero (0) VOC Epoxy.
- Epoxy.com Product #633 Novolac Coating is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solven storage, pump pads, trenches, and other high exposure areas. It is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. Epoxy.com Product #633 Novolac Coating is commonly used as a seal coat for Epoxy.com MORTAR SYSTEMS where chemical resistant performance is required.
Zero (0) VOC Epoxy.
High Temperature Vinyl Ester
Product #660 Universal Primer - used as a primer for Epoxy.com Novolac Vinyl Ester and Vinyl Ester Systems. is a one component, moisture cured polyurethane aluminum filled primer and coating. Its low viscosity, high "wetting" characteristics, and creep, undercutting, and blistering resistance make
Product #660 Universal Primer and Finish a superior primer and finish coat.
Product #660 Universal Primer and Finish undergoes a rapid molecular weight change as it polymerizes into a high molecular weight finish with excellent corrosion and abrasion resistance.
Product #661 Vinyl Ester Binder Adhesive is a clear, 100% reactive, vinyl ester novolac used to coat or line concrete or steel surfaces in chemically aggressive industrial environments. It is used for coating primary and secondary containment, trenches, troughs, pump pads, and equipment.
Product #662 Vinyl Ester Aggregate
Product #663 Vinyl Ester Coating is a 100% reactive, vinyl ester novolac used to coat concrete or steel surfaces in chemically aggressive industrial environments. Due to its high molecular weight and low permeability, it will withstand exposure to bond range of acids, caustiec and solvents. It is designed as a coating for secondary containment, trenches, troughs, pump pads, equipment and structural members. Low Temperature accelerators are available for positive cure at temperatures down as low as 33° F.
Proper mixing and installation is critical to the optimal success
of all product. See
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
For more information please contact:
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Since 1980 - Over 33 years
Florida & Vermont
Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12 Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
352-533-2167 Norm Lambert, President - Technical Support Director
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
352-489-1625 Fax line to all Departments
|| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers.|
Copyright © 1994-2014 (providing online information about the
right product for the right job for 20 years) EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
other wise agreed upon in writing, buyer is responsible for the cost of
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a division of Epoxy Systems, Inc. (hereinafter known as
"Supplier" warrants its products (when properly stored) for the period of
time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylates
and Polyurethanes Six (6) months. Supplier warrants that its products
will be free of manufacturing defects and will be in conformity with
published specifications when handled, stored, mixed and applied in
accordance with recommendations of Supplier. If any product fails to meet
this warranty, the liability of Supplier will be limited to replacement of
any non-conforming material if notice of such non-conformity is given to
Supplier within the warranty period for the material (as indicated above),
or within 1 year of the delivery of materials (whichever is sooner).
Supplier may in its discretion refund the price received by Supplier in lieu
of replacing the material. No customer, distributor, or representative of
Supplier is authorized to change or modify the published specifications of
this warranty in any way. No one is authorized to make oral warranties on
behalf of Supplier. In order to obtain replacement or refund the customer
must provide written notice containing full details of the non-conformity.
Supplier reserves the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S
OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN
ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE
PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR
LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. All quotes and sales subject to availability.
Many of our products are
on an individual order basis. Unless authorized by us
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Catalog of Products]
[Where to Start]
[Elastomeric Polyurethane Systems]
[Epoxy Resin Systems]
[Seamless Garage Floors]
[High Temperature Epoxy]
[Joint Systems / Sealants]
[Methyl Methacrylate (MMA)]
[Mortars / Grouts]
[Novolac] [Primers Sealers]
[Who We Are]
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]