Elastomeric Joint Sealant, Caulking, Crack
Fillers and Sealers
Epoxy Resin Saw Cut Joint Sealants, Epoxy Crack
Clear Epoxy Sealers and Primers
Lo-Mod Adhesive- is a useful tool for rebuilding a damaged
substrate, where an elastomeric system will be installed over it.
Epoxy.com Product #10 is a 100% solids Lo-Mod (semi-flexible) Low
Viscosity (very thin) adhesive used as a binder for epoxy mortar systems
in patching and grouting applications, as a seal coat for non-skid
surfaces outside, and as a primer to insure high bond strength for
coatings and patches. Zero (0) VOC Epoxy.
Product #11 Epoxy Joint Filler useful where you need
something semi-flexible, but need it to hold up to heavy weight.
Epoxy.com Product #11 is a 100% solids flexible epoxy joint filler for
saw-cut joints of concrete slabs on grade, or to repair existing slabs.
Product #11 absorbs the impact and shock of heavy loads and steel
wheeled traffic, preventing erosion of control joint edges.
Product #655 Epoxy Novolac Chemical Resistant Crack Filler
is a two component 100% solids Epoxy Novolac crack filler (gel)
designed for shallow repairs on either vertical or horizontal
surfaces. Because Epoxy Novolac Product #655 is a 100% solids formulation, it can be
applied thicker on horizontal surfaces when required.
Epoxy Gel Super
Fast Cure is a fast setting, 100% solids epoxy crack
gel and filler used to line, patch, or repair floor and
wall surfaces. Epoxy Gel Super Fast Cure Product #2704 is the ideal material for repair of surfaces
damaged from environmental or chemical attack. Epoxy Gel Super Fast
Cure Product #2704 can also be
used as a base material beneath coating, slurry, and mortar systems to repair
PRODUCT #2708 Under Water Pourable Epoxy Crack and Joint Filler
is a two component 100% solids epoxy designed for
applications where contamination from water cannot be controlled or for
underwater repairs and applications.
Epoxy Chemical Resistant Primer and Epoxy Sealer is
a two component, seamless 100% solids epoxy primer system with
High Chemical Resistance Epoxy and High Bond Strength. The epoxy
may be applied as a primer for most High End Industrial
coatings. Makes an excellent stand alone sealer.
Moisture Tolerant Epoxy Primer and Epoxy Basecoat this new
and improved version of Product #100 installs easier and costs lest than
the Original Product #100. consists of a unique water based epoxy
technology which allows the contractor to install epoxy resin floor
systems and other moisture sensitive floor coverings on new concrete (5
days old) without fear of moisture entrapment. Product 100MR Moisture
Tolerant Primer and Base Coat is applied in a two coat application.
Product 100MR Moisture Tolerant Primer and Base Coat is the
primer/basecoat used in various products
is a two component modified epoxy system designed to seal concrete and
reduce moisture vapor transmission prior to applying finished flooring.
Epoxy.com Product #830 has proven to reduce moisture vapor emissions and
be resistant to damage from high alkalinity. Epoxy.com Product #830 is
an environmentally friendly material containing no hydrocarbons or other
solvents making it zero (0) VOC.
Product #899 Epoxy Primer
- a damp primer that is a 100% solids Low-Mod Low Viscosity Primer and Sealer. It
may be used as a primer for any Epoxy.com product, or as a stand alone
Proper mixing and installation is critical to the optimal success
of all product. See
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
For more information please contact:
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Since 1980 - Over 33 years
Florida & Vermont
Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12 Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
352-533-2167 Norm Lambert, President - Technical Support Director
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
352-489-1625 Fax line to all Departments
|| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers.|
Copyright © 1994-2014 (providing online information about the
right product for the right job for 20 years) EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
other wise agreed upon in writing, buyer is responsible for the cost of
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a division of Epoxy Systems, Inc. (hereinafter known as
"Supplier" warrants its products (when properly stored) for the period of
time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylates
and Polyurethanes Six (6) months. Supplier warrants that its products
will be free of manufacturing defects and will be in conformity with
published specifications when handled, stored, mixed and applied in
accordance with recommendations of Supplier. If any product fails to meet
this warranty, the liability of Supplier will be limited to replacement of
any non-conforming material if notice of such non-conformity is given to
Supplier within the warranty period for the material (as indicated above),
or within 1 year of the delivery of materials (whichever is sooner).
Supplier may in its discretion refund the price received by Supplier in lieu
of replacing the material. No customer, distributor, or representative of
Supplier is authorized to change or modify the published specifications of
this warranty in any way. No one is authorized to make oral warranties on
behalf of Supplier. In order to obtain replacement or refund the customer
must provide written notice containing full details of the non-conformity.
Supplier reserves the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S
OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN
ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE
PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR
LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. All quotes and sales subject to availability.
Many of our products are
on an individual order basis. Unless authorized by us
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Catalog of Products]
[Where to Start]
[Elastomeric Polyurethane Systems]
[Epoxy Resin Systems]
[Seamless Garage Floors]
[High Temperature Epoxy]
[Joint Systems / Sealants]
[Methyl Methacrylate (MMA)]
[Mortars / Grouts]
[Novolac] [Primers Sealers]
[Who We Are]
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]