Epoxy.com Product #15

Epoxy Chemical Resistant Flooring Resurfacing System

Best Material for Installing Seamless Epoxy and Colored Quartz Flooring Systems

GENERAL DESCRIPTION

Epoxy.com Product #15 Epoxy Chemical Resistant Flooring Resurfacing System for Seamless Epoxy Quartz Flooring is a two component, seamless 100% solids epoxy clear resurfacing system with High Chemical Resistance. The epoxy may be applied as a coating, or combined with silica sand or Epoxy.com multi-colored quartz aggregate to produce a durable, easy to maintain floor, on both new and old surfaces.

Although Epoxy.com Product #15 Epoxy Chemical Resistant Flooring Resurfacing System for Seamless Epoxy Quartz Flooring is primarily used as a flooring and mortar resin is one of Epoxy.com's most versatile products. It is also commonly used for resealing epoxy bonded stone, and as a carbon composite and fiberglass layup resin.

APPLICATIONS

Aisle Ways
Assembly Plants
Bakeries
Basement Floors
Bottling Plants
Break Rooms
Cafeterias
Canning Plants
Car Washes
Cells
Chemical Storage Areas
Chemical Processing Areas
Church Floors
Classroom Floors
Corridors
Educational Facilities
Entrances
Epoxied Stone Recoating
Food Plants
Fork Lift Areas
Health Care Facilities
Hospitals
Kennels
Kitchens
Laboratories
Law Enforcement Facilities
Laundries
Leveling concrete
Loading docks
Locker Rooms
Machine Shops
Manufacturing Areas
Marine Surfaces
Meat Preparation Areas
Mortuaries
Nuclear Plant Floors
Offices
Patching concrete
Photography Processing Areas
Power Plants
Printing Plants
Produce Preparation Areas
Pool Decks
Ramps
Research Facilities
Rest Rooms
Restaurants
Semiconductor Plants
Sewer Plants
Sealing "Epoxy and Stone" Decking
Shop Floors
Shopping Centers
Shower Rooms
Store Floors
Show Rooms
Supermarkets
Veterinary Facilities
Water Plants
Warehouses
& many others

Epoxy.com Product #15 Multi-Colored Seamless Epoxy Flooring System used on a counter top

Picture courtesy of Walter Decorating
(c)2006 Walter Decorating Coatings
Used with permission, all rights reserved.

ADVANTAGES

LOW ODOR
CHEMICAL RESISTANT
STRONG YET RESILIENT
VARIABLE SURFACES FROM NON-SLIP TO SMOOTH
ABRASION RESISTANT
ZERO VOCs
MEETS USDA STANDARD FOR USE IN FOOD HANDLING APPLICATIONS

SURFACE PREPARATION

Surface to receive Epoxy.com Product #15 Epoxy Chemical Resistant Flooring Resurfacing System for Seamless Epoxy Quartz Flooring must be clean and sound. Remove all dirt, laitance, grease curing compounds and other foreign matter by sandblasting, mechanical abrasion. If acid etching is used follow with abrasive or mechanical abrasion. Remove water and dust from all surfaces with an oil free blast, or vacuum, immediately prior to application.

MIXING INSTRUCTIONS

Temperature of Epoxy.com Product #15 Epoxy Chemical Resistant Flooring Resurfacing System for Seamless Epoxy Quartz Flooring must be 65 degrees F or above at time of mixing. Stir each component separately before blending. Mix two parts by volume of Part A with one part by volume of Part B for three minutes with a low speed electric drill motor equipped with a mixing paddle.

APPLICATION

Epoxy.com Product #15 Epoxy Chemical Resistant Flooring Resurfacing System for Seamless Epoxy Quartz Flooring can be applied with brush, roller, trowel, airless sprayer or squeegee. Apply a coat of #15 to surface to be finished, doing only a small area at a time. If anti-skid is required, (while epoxy is still wet) it may be broadcast with aggregate. This can be done by hand or mechanical means. Make sure that the entire surface is completely covered (no shiny spots visible). Allow them to dry. Then sweep off excess aggregate. Sand surface (if required) to desired texture. If broadcast with sand a top-coat over the entire surface will be required if cleanability is important. For more information on installation please see:

LIMITATIONS

New concrete to receive Epoxy.com Product #15 Epoxy Chemical Resistant Flooring Resurfacing System for Seamless Epoxy Quartz Flooring should be at least 28 days old. Temperature of substrate must be above 55 degrees F. DO NOT thin. For indoor use (except when used to seal Epoxy.com Product #17 or similar product) contact Epoxy.com for technical assistance.

OPTIONAL FEATURES

INTEGRAL COVE BASE
AGGRESSIVE,MEDIUM, FINE, and SMOOTH TEXTURES
FINALCOAT OF URETHANE FOR EXTENDED DURABILITY AND WEAR
CLEAR, SOLID, OR MULTI-COLORED
VARYING THICKNESS FROM 10 MILS TO 4 INCHES
EPOXY.COM WARE CODED LAYERS

SAFETY PRECAUTIONS

Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.

CLEANING

All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent.

APPLICATION PROPERTIES @77°F
Mix Ratio	2:1 By Volume
Viscosity (mixed)	450 CPS
Pot Life (200 gr.)	30 minutes
Cure Time (Walk-on Traffic)	24 hours
Cure Time (Truck Traffic)	48 Hours
Final Cure	7 Days
VOC Content	0.0 lbs per Gallon (Zero VOC)
Packaging (unit size)	15 gal. Units (5 gal pails)

PHYSICAL PROPERTIES (neat)
Bond Strength (ASTM C-882)	2110 PSI
Flexural Strength (ASTM D-2240)	6075 PSI (7 days)
Compressive Strength (ASTM D-695)	9910
Absorption (ASTM D-570)	0.6%
Thermal Shock	40 Hr. @10° F., 3 Min. @ 212° F. Shock Water @ 33° F.
Hardness (Shore D)	65 @ 24 Hours, 75 @ 7 days

CHEMICAL RESISTANT CHART
Reagent	CHEMICAL TEST TIME MONTHS
Reagent	1	3	6	9	12
WATER, DISTILLED	+	+	+	+	+
SEAWATER	+	+	+	+	+
SULFURIC ACID, 10%	+	+	+	+	S
SULFURIC ACID, 30%	+	+	+	-	-
SULFURIC ACID, 70%	+	+	+	-	-
HYDROCHLORIC ACID, 10%	+	+	+	+	+
HYDROCHLORIC ACID, 20%	+	+	+	+	+
HYDROCHLORIC ACID, 36%	+	+	+	+	+
HYDROCHLORIC VAPOR	+	+	+	+	+
ACETIC ACID, 5%	+	+	-	-	-
ACETIC ACID, 10%	-	-	-	-	-
AMMONIUM HYDROXIDE, 10%	+	+	S	S	-
AMMONIUM HYDROXIDE, 25%	+	S	-	-	-
SODIUM HYDROXIDE, 20%	+	+	+	+	+
ACETONE	-	-	-	-	-
BUTANONE	-	-	-	-	-
BUTYL ACETATE	+	+	S	S	S
DIACETONE ALCOHOL	+	+	+	+	+
CELLOSOLVE	S	S	S	S	S
ETHANOL, 50%	+	+	+	-	-
ETHANOL, 96%	-	-	-	-	-
OCTANOL	+	+	+	+	+
XYLENE	+	+	+	+	+
TOLUENE	+	+	+	+	+
BENZENE	+	+	S	S	S
SKYDROL	+	+	+	+	+
TRICHLOROETHYLENE E	+	+	S	S	S
CRUDE OIL	+	+	+	+	+
GASOLINE, 98 OCTANE	+	+	+	+	+
ACETAL GLACIAL	-	-	-	-	-
CITRIC 10%	+	+	+	+	+
CITRIC 50%	+	+	+	+	+
FATTY ACID (LINSEED)	+	+	+	+	+
LACTIC (DAIRY PRODUCTS)	+	+	+	+	+
NITRIC 10%	+	-	-	-	-
NITRIC 20%	+	-	-	-	-
NITRIC 30%	+	-	-	-	-
PHOSPHORIC	-	-	-	-
ALLYL CHLORIDE	+	S	S	S	S
CARBON TETRACHLORIDE	+	+	+	+	+
DIETHYLENE TRIAMINE	-	-	-	-	-
ETHYL ALCOHOL	-	-	-	-	-
ETHYLENE DIAMINE	-	-	-	-	-
FORMALDEHYDE	-	-	-	-	-
METHYL ETHYL KETONE	S	-	-	-	-
ISOPROPYL ALCOHOL	+	+	+	+	+
METHYL ISOBUTYL CARBINOL	+	+	+	+	+
METHYL ISOBUTYL KETONE	S	S	S	S	S
MINERAL SPIRITS	+	+	+	+	+
DETERGENTS ANIONIC 2%	+	+	+	+	+
CALCIUM HYPOCHLORITE 5%	+	+	+	+	+
SODIUM CHLORITE 25%	+	-	-	-	-
SODIUM HYPOCHLORITE 5%	+	-	-	-	-
STAIN RESISTANCE
BUTTER	+	+	+	+	+
CITRUS JUICES	+	+	+	+	+
COFFEE	+	+	+	+	+
COLA	+	+	+	+	+
GREASE	+	+	+	+	+
HAIR TONIC	+	+	+	+	+
INK	+	+	+	+	+
LARD	+	+	+	+	+
LIPSTICK	+	+	+	+	+
LIQUOR	+	+	+	+	+
MILK	+	+	+	+	+
MINERAL OIL	+	+	+	+	+
MUSTARD	+	+	+	+	+
VINEGAR	+	+	+	+	+
SANDBLASTED STEEL PANELS, COATED WITH AN AVERAGE. OF 14 MIL FILM THICKNESS, IMMERSED IN THE VARIOUS MATERIAL FOR UP TO ONE YEAR + = Resistant S= Softened -= Attacked