Epoxy.com Seamless Heavy Duty Industrial Epoxy Flooring

[Home] [Catalog of Products] [Where to Start] [Guide Specs][Installation Guides] [Blog Posts] [Bonding Adhesives] [Chip Floors Chemical Resistant] [Chemical Resistant Coatings] [Coatings] [Conductive Flooring] [Applications] [Elastomeric Decking Systems] [Epoxy Resin Systems] [Seamless Garage Floors] [High Temperature ] [Industrial Floors] [Injection] [Joint Systems / Sealants] [ Methyl Methacrylate (MMA)] [Mortars / Grouts] [Novolac] [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips] [Product Guide] [Wood Filler] [Who We Are] [Guide Specs]  [Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]  [Add this page to Favorites] [Contact UsPhone 352.489.1666

 

Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Epoxy.com Seamless Industrial Epoxy Flooring

Highest Quality - Most Durable Seamless Epoxy Floors


Overview
Experience
Flooring
Methyl Methacrylate Mortars and Crack Repair Materials
Floor Primers
Accessories and Fillers
Floor Sealers
 

Overview

Epoxy.com a division of Epoxy Systems, Inc. offers a wide variety ofSeamless Industrial Flooring Materials. Your industrial flooring needs may be as simple and inexpensive as Epoxy.com Seamless Industrial Epoxy Floor Sealing Systems Product #12. It may require special materials Industrial Flooring and Industrial Coating Systems like  Epoxy.com Vinyl Ester Systems, Epoxy.com Product #630 or #633 Epoxy Novolac Coating, or one of our other special Seamless Heavy Duty Industrial  Flooring Products.

Your requirements may require decorative materials like Epoxy.com Product  #66 #67 & 68 Colored Aggregates or Epoxy.com Seamless Resurfacing Chips. Both are very durable, and both can produce stunning results.

Many of Epoxy.com Industrial Flooring Systems are attractive enough for residential and office flooring. One of the most widely used Epoxy.com Commercial Flooring Systems - Epoxy.com Chip Flooring - is a proven workhorse in those areas.

Proven Experience

Epoxy.com the products division of Epoxy Systems, Inc. of Florida and Vermont can assist with it's large store of experience. Although no longer an installation/contracting firm, Epoxy Systems, Inc. has engineered, installed, and compounded some for over a quarter century. Most technical service is handled by the owners and former installers of Epoxy.com Products. They continue to work the Engineering, Contracting, and Formulating side of the business. If a heavy duty seamless industrial flooring or industrial coating product does not exactingly meet the requirements of the Engineering and Contracting side of our business, it will never get sold to for use in Seamless Industrial Flooring and Seamless Industrial Coating projects. Let us put our decades of experience to work for you.

 

Products Typically Used for Epoxy.com Flooring

Most of Epoxy.com Coatings can also be used to make seamless floors. Some of the Seamless Flooring Systems below will also benefit from the use of a Primer. Contact Epoxy.com Technical Support for details.

Methyl Methacrylate - MMA

684LV - MMA CONCRETE CRACK HEALER and SEALER is a 100% reactive ultra-low viscosity methyl methacrylate resin used as a penetrating crack sealer or to fortify extremely porous concrete substrates. MMA CONCRETE CRACK SEALER Product #684LV is typically used on bridge decks, parking structures or as a general penetrating sealer to prevent moisture intrusion. Replaces Product #685

Product #690 Medium Viscosity Methyl Methacrylate (MMA) Sealer and Top Coating is a 100% reactive, medium viscosity methyl methacrylate resin developed as a sealer/topcoat over Product #697 and Product #698 Methyl Methacrylate (MMA) Flooring and Decking Systems.

Product #691 Methyl Methacrylate (MMA) Primer is a 100% reactive methyl methacrylate primer for all Epoxy.com MMA floor and wall systems. Product #691 Methyl Methacrylate (MMA) Flooring Primer also provides excellent filling and sealing as a scratch work filler (with filler added) to level uneven floor and wall surfaces. Product #691 Methyl Methacrylate (MMA) Flooring Primer is a reactive Methacrylate resin, which hardens rapidly with the addition of Product #695 MMA hardener, even at low temperatures.

Product #692 MMA Membrane is a Flexible Methyl Methacrylate (MMA) Flooring, Decking Bridge  Mortar Resin is a higher viscosity, 100% reactive, flexible methyl Methacrylate resin used as a crack isolation or waterproofing membrane under Epoxy.com MMA Systems. Product #692 Flexible Methyl Methacrylate (MMA) resists cracking caused by horizontal substrate movement providing a crack resistant, resilient surface. Product #692 Flexible Methyl Methacrylate (MMA) offers stress relieving properties for floor slabs showing movement and/or vibration.

Product #693 MMA Coating is a 100% reactive, medium viscosity methyl methacrylate resin developed as a topcoat for exterior or interior use with Epoxy.com MMA Systems.  Product #695 Methyl Methacrylate (MMA) Coating is semi-flexible for outside use and will not yellow after curing. Its excellent clarity makes it ideal for sealing color quartz and vinyl flake systems. It is excellent for exterior applications such as parking decks, concrete and steel stairs, ramps, and numerous other applications.

Product #695 Hardener Powder (BPO) for Epoxy.com MMA Flooring Systems is for use with Products #691, #692 Methyl Methacrylate (MMA) Membrane and #693 Methyl Methacrylate (MMA) Coating. Product #695 Hardener Powder (BPO) for Epoxy.com MMA Flooring Systems dosing can be changed due to temperature and desired set time / working time. Product #695 must be well mixed with Epoxy.com MMA before adding any other aggregates and fillers.  After mixing the Product #695 Hardening Powder into Epoxy.com  MMA the polymerization reaction which leads to the hardening of the MMA begins.

Product #697 Methyl Methacrylate (MMA) Binder Resin - a 100% reactive methyl methacrylate binder resin and top coat for self leveling, broadcasting, and troweled mortar systems. Product #697 Methyl Methacrylate (MMA) Binder Resin is ideal for decorative troweled and broadcast quartz floors and industrial surfacing subject to heavy loads and traffic.

Product #698 Methyl Methacrylate (MMA) Binder Resin  is a 100% reactive, low viscosity, flexible methyl methacrylate resin for use as a binder for low resin content troweled mortars and polymer concrete. The resin is ideal for making repairs and to change the slope on floors, bridge decks and joint headers.

Product #699 Low Viscosity Methyl Methacrylate (MMA) Sealer is a 100% reactive, low viscosity methyl methacrylate resin developed as a chemical resistant sealer/topcoat. Product #699 Low Viscosity Methyl Methacrylate (MMA) Sealer cures to a hard, scratch and wear resistant surface and is specifically designed for dry service in areas subjected to high traffic such as manufacturing areas, aisles, lobbies, service areas, and numerous other applications.

Products typically as Epoxy.com Flooring Accessory Products and Fillers

Sealers & Primers

  • Product #12 Epoxy Primer and Epoxy Sealer is a two component, seamless 100% solids epoxy primer system with High Chemical Resistance Epoxy  and High Bond Strength. The epoxy may be applied as a primer for most High End Industrial coatings, like Epoxies, MMA, Polyurethane's, Vinyl Esters, Polyesters, etc.
  • Epoxy.com Product #80 Acrylic Sealer-  a clear acrylic solution formulated to create a clear, non-yellowing protective coating. Epoxy.com Product #80 Acrylic Sealer provides a tough, UV and abrasion resistant film that effectively protects surfaces from moisture penetration, staining, dirt, dust, and wear. Providing a surface that is easy to clean and maintain, Epoxy.com Product #80 Acrylic Sealer is an excellent choice for both interior and exterior applications.
  • Epoxy.com Product #201 Oil Stop Primer for instances petroleum can penetrate the surface of a two component, epoxy-amine undercoating designed to be compatible with petroleum based oil and greases. In many instances petroleum can penetrate the surface of concrete floors to the extent that the oil may not be removed by surface cleaning. If untreated, this oil may migrate back to the surface to cause a delamination.
  • Product #231 - Water Based Epoxy  Emulsion Primer and Sealer is a water based epoxy primer/sealer designed to have maximum resin penetration into concrete surfaces to provide high bond strength and adhesion. Product #231 Water Based Epoxy  Emulsion Primer and Sealer   has very low odor and, therefore, can be used in occupied areas. Product #231 Water Emulsion Primer and Sealer has the ability to be applied to recently poured (green) concrete and achieve excellent adhesion. Product #231 Water Emulsion Primer and Sealer is ideal for both new and old concrete surfaces.  It is used as a primer for High Build and Thin Film Coating Systems. Replace Product #222.
  • Product #830 Epoxy Moisture Vapor treatment is a two component modified epoxy system designed to seal concrete and reduce moisture vapor transmission prior to applying finished flooring. Product #830 Epoxy Moisture Vapor treatment has proven to reduce moisture vapor emissions and be resistant to damage from high alkalinity. Product #830 Epoxy Moisture Vapor treatment is an environmentally friendly material containing no hydrocarbons or other solvents making it zero (0) VOC.
  • Product #899 Epoxy Primer is a moisture insensitive 100%  solids Low-Mod Low Viscosity Primer and Sealer. It may be used as a primer for any Epoxy.com product, or as a stand alone sealer.  Zero (0) VOC Epoxy.

Job Supplies - for roller applications

 Skip Navigation Links

Epoxy.com Home PageExpand Epoxy.com Home Page

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems,
Since 1980 - Over 33 years
Florida & Vermont
USA


Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12 Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylates  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are batched on an individual order basis. Unless authorized by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance] [Coatings] [Conductive Flooring] [Applications] [Elastomeric Polyurethane Systems] [Epoxy Resin Systems] [Seamless Garage Floors] [High Temperature Epoxy] [Industrial Floors] [Injection] [Joint Systems / Sealants] [Methyl Methacrylate (MMA)] [Mortars / Grouts] [Novolac] [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips] [Product Guide] [Wood Filler] [Who We Are] [Guide Specs] [Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form] [Add this page to Favorites]

7317656