Epoxy Wall Coatings 100% Solids

Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Epoxy Wall Coatings Heavy Duty 

Epoxy Wall Coatings Zero "0" VOCs - 100% Solids


Most Epoxy.com Floor Coatings can be used on walls, but it is hard work to install a floor coating on a wall and not have any runs. Our wall coatings are designed to make the installation easy, while giving you outstanding esthetics.The wall grade version of our coatings can even be applied to ceilings. These epoxy wall coatings all dry to a super hard, super scrubable  ceramic like finish.  All of them are available in 14 standard colors. You can order it in custom colors but there may be a small batch fee and/or pigment upcharge depending on the batch size and cost of the custom pigments.

All of the wall coatings we sell are highly durable and highly scrubble. Properly intalled it will take a life time to wear them out.  All the wall coatings we provide can be used to produce a waterproof wall system.  All these systems can be used to tie into the protection of our flooring systems extending this protection to your walls to ceiling. The difference between our wall coatings is chemical resistance.

Product #1W Wall Grade Epoxy  is a two component, 100% solids Hi-Build epoxy coating used for high indoor traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative waterproof coating for walls, tanks, etc. Excellent for wet areas where there is only a mild chemical exposure, such as  bathrooms, commercial kitchens,  food processing plants, laundrymats, meat rooms, produce prep areas, showers, etc..

Product #2W Chemical Resistant Epoxy Wall Coating   is a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Product #2W is an excellent choice where you need to balance higher chemical resitance than #1W but with a much lower cost than the Novolac Epoxy Coatings listed  below. It is not as chemical resistant as our Novolacs, but it costs just a little more than the Product #1W. It can be used for every place you can use #1W and is also excellent to coat septic tanks, car wash tunnels, sewer tanks and trenches, oil management buildings, maintance buildings for vehicals and equipment, etc.

Product #630 Novolac Coating is a 100% solids epoxy Novolac ideal for harsh chemical and solvent resistant applications Is also available in wall grade. It is an ideal coating for concrete and steel in extremely corrosive areas where resistance to 98% sulfuric acid or other strong caustics is needed. It is a great superior coating for concrete and steel in the extremely corrosive areas of chemical plants, pulp mills, secondary containment areas, water and waste treatment, and gas and electric utilities. Can be used for all the things product #1 and Product #2 above and is excellent when used in chemical bulk tank rooms, chemical drum and smaller storage rooms, chemical feed and pump rooms, chemical processing vats, and more

Product #633 Novolac Coating is also availabl in a thicker wall grade formula. It is a 100% solids poxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. It is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants, and pulp mills, secondary containment areas, water and waste treatment, and gas and electric utilities. Product #633 Novolac is even more chemical resistant than the #630 and is only slightly higher in costs. Product #633 Novolac Epoxy is also excellent for all the uses of the products above, and for more agressive and longer exposures to chemicals and  for resurfaceing lab tops and lab sinks.

Summary

Our Epoxy Wall Coatings come in a wide variety of colors and chemical resistance. They all form a hard durable ceramic like finish that is unlikely to wear out with even decades of service. They all provide a water tight, with chemical resistances from mild to very harsh chemicals

Still not sure which epoxy wall coating product is the right product for your job? Please contact our technical support department for a recommendation.

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems,
Since 1980 - Over 33 years
Florida & Vermont
USA


Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12 Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2015 (prproviding online information about the right product for the right job for 20 year Epoxy Systems Inc. DBA Epoxy.com - Florida and Vermont.  All rights reserved.

[Count could not be obtained due to the following error]: Access to the path '\\WDP\DFS\43\7\0\6\4354596607\user\sites\1799629.site\www\counter.txt' is denied.