Epoxy.com Novolac Epoxy Coatings
Extra Heavy Duty Industrial Chemical Resistant Coatings
Chemical Resistant Novolac Epoxy
-
Epoxy.com Product #600 Flexible Novolac is a two-component,
100% solids epoxy coating based on multi-functional high performance
flexibilized resin. Epoxy.com Product
#600 Flexible Novolac provides corrosion resistant protection to
steel, other metals and concrete. It has excellent resistance to
chemicals up to 300°F. It is resistant to continuous immersion in water
up to 212°F. Epoxy.com Product #600
Flexible Novolac is formulated in a convenient 1 to 1 ratio, by
volume mix ratio and has a long pot life to simplify application.
Epoxy.com Product #600 Flexible Novolac is more effective in
applications which entail force curing.
-
Epoxy.com Product #630 Novolac Coating/Mortar Binder - a
100% solids epoxy Novolac ideal for harsh chemical and solvent resistant
applications. It is ideal for use as a troweled mortar, slurry binder,
and coating for concrete and steel in extremely corrosive areas where
resistance to 98% sulfuric acid or other strong caustics is needed.
Epoxy.com Product #630 Novolac Coating/Mortar Binder is ideal for
use as a protective coating for concrete and steel in the extremely
corrosive areas of chemical plants and pulp mills secondary containment
areas, water and waste treatment, and gas and electric utilities.
- Epoxy.com Product #633 Novolac
Coating is a 100% solids epoxy Novolac coating ideal for harsh
chemical and solvent resistant applications. It is used in secondary
containment, solven storage, pump pads, trenches, and other high exposure areas.
It is ideal for use as a protective coating for concrete and steel in the
extremely corrosive areas of chemical plants and pulp mills secondary
containment areas, water and waste treatment, and gas and electric utilities.
Epoxy.com Product #633 Novolac Coating is commonly used as a seal coat for
Epoxy.com MORTAR SYSTEMS where chemical resistant performance is
required.
- Epoxy.com Product
#634 Novolac High Temperature Epoxy - is a 100%
solids amine cured epoxy Novolac that is solvent free. Suitable
for immersion and non-immersion service particularly in
aggressive acid and alkali environments with elevated
temperatures.Epoxy.com Product
#634 Novolac High Temperature Epoxy produces a tough,
chemical resistant coating on concrete, iron and non-iron
surfaces. As a low viscosity epoxy Novolac it is suitable for
hand or spray application.
- Epoxy.com Product #636
High Temp Chemical Resistant Primer/Topcoat - a 100%
solids amine cured epoxy Novolac that is solvent free.
Epoxy.com Product #636 High Temp Chemical Resistant Primer/Topcoat
is Specifically designed as a Methanol resistant coating.
Epoxy.com Product #636 High Temp Chemical Resistant Primer/Topcoat
is well suited for use in a wide array of aggressive acids, alkalies and
organic solvents. It produces a tough, chemical resistant coating on
concrete, iron and non-iron surfaces. As a low viscosity epoxy Novolac
it is suitable for hand or spray application.
- Epoxy.com Product #637
High Temp Coating/Primer is a 100% solids amine cured epoxy
Novolac that is solvent free. Suitable for immersion and non-immersion
service particularly in aggressive acid environments.
Epoxy.com Product #637 High Temp Coating/Primer produces a tough,
chemical resistant coating on concrete, iron and non-iron surfaces. As a
lower viscosity epoxy Novolac it is suitable as a primer or as a top
coating. Excellent against 98% Sulfuric Acid.
- Epoxy.com Product #638 Glass Filled Novolac
- Epoxy.com Product
#643 Highly Chemical Resistant Coating is a solvent free,
high functionality Novolac epoxy coating suitable for immersion and
non-immersion service. Designed specifically as a Methanol resistant
coating. Epoxy.com Product
#643 Highly Chemical Resistant Coating is well suited for
protection in a wide array of aggressive acids, alkalies and organic
solvents. It produces a tough, chemical resistant coating on ferrous and
non-ferrous metals and concrete.
- Epoxy.com Product #648
Chemical Resistant Coating is a two component high performance
epoxy resin formulated with a convenient 1 to 1 mix ratio.
Epoxy.com Product #648 Chemical Resistant Coating has been developed as
a coating for exposure to organic acids and other severe chemical
environments. It is used widely in the food and chemical industries for
protection of concrete, wood, and steel.
Epoxy.com Product #648 Chemical Resistant Coating is suitable for
application by brush, roller or spray. Where in-shop production techniques
may be utilized and elevated temperature curing is feasible, rapid property
development may be achieved by curing at 200° - 250°F (93° - 121°C). This
will provide a cured film which may be handled within a relatively short
period of time (about 4 hours). Elevated temperature curing will also
enhance ultimate physical and chemical resistant properties.
- Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating is a 100% solids - Zero (0) VOC epoxy Novolac Chemical resistant conductive (anti-sparking) epoxy flooring and floor coating system ideal for severe chemical and solvent storage requiring a chemically resistant conductive and spark resistant surface.
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2013 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Home]
[Catalog of Products]
[Where to Start]
[[Bonding Systems]
[Chip Floors]
[Chemical Resistance]
[Coatings]
[Conductive Flooring]
[Applications]
[Elastomeric Polyurethane Systems]
[Epoxy Resin Systems]
[Seamless Garage Floors]
[High Temperature Epoxy]
[Industrial Floors]
[Injection]
[Joint Systems / Sealants]
[Methyl Methacrylate (MMA)]
[Mortars / Grouts]
[Novolac Epoxy]
[Polymer Systems]
[Primers Sealers]
[Misc.]
[Seamless Flooring]
[Waterproofing]
[Dealers Wanted]
[Installation Tips]
[Product Guide]
[Wood Filler]
[Who We Are]
[Guide Specs]
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]
6474982
|