Epoxy Bonding + Epoxy Adhesives (Epoxy Glue)
Used in Bonding and Waterproofing Systems
Almost all our epoxy resins can be used as an epoxy bonding and adhesive
systems. However, the thicker epoxies (epoxy gels) typically make the
better adhesives, because they are easier to use when Appling a thick
layer. Below is a list of medium to very thick epoxies. These epoxies are
designed with the primary function of bonding various materials to other
materials. Our Epoxy
Gel Adhesives Systems are called by a number of different terms throughout the
industry, including but not limited to: Epoxy Bonder, Epoxy Adhesive
Epoxy Gel Adhesive Systems, Epoxy Bonding Systems, Epoxy Gel Patching Adhesive,
etc. Epoxy.com Gel Adhesive Systems are zero (0) VOC. Having no VOCs means that
Epoxy.com Epoxy Gel products meet even the strictest Low VOC
For thinner adhesives please see Epoxy.com Injection and Structural Adhesives
- Epoxy Fast Setting Gel
Adhesive - Product #5 is a 100% solids high-mod epoxy gel adhesive
system used for
vertical and overhead bonding applications and structural repairs. It is also
used as a grout for anchor bolts, dowels and rebar. Zero
- Epoxy Normal Setting Gel
Adhesive - Product#6 Gel is a high-mod epoxy gel adhesive
system used for vertical and
overhead bonding applications and structural repairs. It is also used as a grout
for anchor bolts, dowels and rebar. Zero (0) VOC.
- Epoxy All Purpose
Bonding Agent and Wet Concrete to Dry Concrete Adhesive -Product #7 is a two component, 100% solids epoxy resin system
designed to bond new concrete to old and other materials to
concrete. It has a convenient 1:1 mix ratio, by volume with a viscosity similar
to heavyweight oil. It exceeds the requirements of ASTM C-881-90, Types I, II,
IV and V, Grade 2, Class "B" and "C".
Zero (0) VOC.
All Purpose Slow Setting Bonding Agent and Wet Concrete
Adhesive Slow Cure - Product #7SC is
a 100% solids high-mod epoxy adhesive used to bond fresh concrete to cured
concrete, steel to fresh or hardened concrete, as a grout for anchor bolts,
dowels and rebar, as a binder for epoxy concrete, and for bonding other
dissimilar materials. It is similar to Epoxy.com Product #7 but with a slower
cure to allow more time for concrete pours. Zero (0)
- Epoxy Decorative Stone
Overlay Adhesive Resin - Product #17 - a two component, 100% solids high-mod epoxy adhesive used for bonding stone and other aggregates in all types of flooring applications. Some uses would include patios, pool decks, walkways and other areas where a long wearing and decorative system is desired.
Zero (0) VOC Epoxy.
- Epoxy General Purpose - Product #18 - a hard set epoxy compound formulated for general use.
Epoxy.com Product #18 cures at room temperature and is a low viscosity system. This durable, resilient material requires no post curing to achieve permanent bond strength. Mixing ratio of 1 to 1 makes this product easy to use. Epoxy.com Product #18 General Purpose Epoxy solves many difficult bonding, and epoxy mortar problems. Product has the ability to bond to a variety of substrates including cannot dry and hard to dry surfaces. Zero
(0) VOC Epoxy.
- Epoxy Flexible Bonder - Product #701
is a two component, 100% solids, mixedat a 1:1 ratio adhesive formulated to give
a permanent bond to ceramic, metal, concrete and elastomeric surfaces. It is
thixotropic, non-sag, and is easily applied by trowel. Zero
(0) VOC Epoxy.
- Epoxy Traffic Marker and
Anchor Bolt Adhesive- Product #702 is a two component, 1:1 ratio, 100%
solids, moisture insensitive epoxy resin system manufactured to bond delineators
and traffic markers to median barriers, parapets, and roadways. It is a normal
setting adhesive for use in temperatures above 50° F. Epoxy.com Product #702 Traffic Marker and Anchor Bolt
Adhesive will bond to steel, concrete, and asphalt. It exceeds the
requirements of AASHTO M237 Type IV. Zero (0) VOC Epoxy.
- Epoxy Flexible Gel
Adhesive - Product #703 is a non-sagging material that is ideal for repairs on
vertical or overhead surfaces. It exceeds the requirements of ASTM C 881-87,
Types I, II, and III Grade 3, Class "B", "C", "E" and "F".
Zero (0) VOC Epoxy.
- Emergency Epoxy - Product #704 is a rapid setting, two component, 1:1 ratio epoxy adhesive. It sets in six
minutes and can be put into service in one hour regardless of temperature. It
was designed to bond metals, glass, concrete and wood in a matter of minutes.
Zero (0) VOC Epoxy.
- Flexible Epoxy Adhesive -Product #705 is a two component flexible adhesive, formulated to bond PVC and plastics to
various substrates. Epoxy.com Product #705 Two Component
Flexible Adhesive will adhere plastics to other plastics, concrete, steel,
wood and masonry. Epoxy.com Product #705 Two Component
Flexible Adhesive is thixotropic and is easily applied by serrated trowel.
Zero (0) VOC Epoxy.
- Heat Resistant Epoxy
Bonder/Mortar - Product #706 is a 100% solids, moisture insensitive epoxy adhesive
and repair material. When A and B Components are mixed they produce a gel
consistency similar to petroleum jelly, which will not sag or run on a vertical
or overhead surface application. Zero (0) VOC Epoxy.
- Epoxy for Splash Zone &
Under Water - Product #707 Paste is a moisture-insensitive, two-component,
100% solids epoxy-resin system. When Product
#707 Splash Zone & Under Water Epoxy is mixed at a 1:1 ratio, by volume,
this product produces a paste-like material that is ideal for protection or
restoration of concrete, steel and timber piles and other structural elements in
marine environments. Zero (0) VOC Epoxy.
- Epoxy protective
Anti-cavitation and anti- Erosion Coating - Product #711 is
protective coating designed to provide cavitation, erosion and corrosion
resistance to metallic and non-metallic surfaces. Epoxy.com Product #711 acts as a barrier against
extremely harsh environmental factors such as low and high PH, temperatures
extremes, dry and fluid particulate flow and corrosive chemical attack.
Zero (0) VOC Epoxy.
- Epoxy.com Product #713 Dowel Bar and
Anchor Bolt Adhesive is a two component, thixotropic, fast
setting epoxy adhesive. It is specifically formulated with an easy to use,
nonsag consistency. The special high function resin system allows cure in
temperatures as low as 20 F. The non-sagging properties will permit the material
to be pumped or gunned into horizontal holes for anchoring rebar or steel bolts.
Epoxy.com Product #713 Dowel Bar and Anchor
Bolt Adhesive exceeds the requirements of ASTM C 881-90 Types, I, II, Grade
3, Class A. Zero (0) VOC Epoxy.
Epoxy Cove Base Binder -Product #720 - can be used to install an integral cove base for most
Epoxy.com Flooring Systems, to provide seamless wall to floor protection.
Zero (0) VOC Epoxy.
Other Epoxy and Resinous Products That May Interest You
Proper mixing and installation is critical to the optimal success
of all product. See
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
For more information please contact:
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Florida & Vermont
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
352-533-2167 Norm Lambert, President - Technical Support Director
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
352-489-1625 Fax line to all Departments
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
|| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers.|
Copyright © 1994-2013 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
other wise agreed upon in writing, buyer is responsible for the cost of
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Catalog of Products]
[Where to Start]
[Elastomeric Polyurethane Systems]
[Epoxy Resin Systems]
[Seamless Garage Floors]
[High Temperature Epoxy]
[Joint Systems / Sealants]
[Methyl Methacrylate (MMA)]
[Mortars / Grouts]
[Who We Are]
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]