Epoxy.com Cold Temperature Epoxy Resin and MMA

[Home] [Catalog of Products] [Where to Start] [Guide Specs][Installation Guides] [Blog Posts] [Bonding Adhesives] [Chip Floors Chemical Resistant] [Chemical Resistant Coatings] [Coatings] [Conductive Flooring] [Applications] [Elastomeric Decking Systems] [Epoxy Resin Systems] [Seamless Garage Floors] [High Temperature ] [Industrial Floors] [Injection] [Joint Systems / Sealants] [ Methyl Methacrylate (MMA)] [Mortars / Grouts] [Novolac] [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips] [Product Guide] [Wood Filler] [Who We Are] [Guide Specs]  [Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]  [Add this page to Favorites] [Contact UsPhone 352.489.1666

 

Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Epoxy.com Cold Temperature Resins

Low Temperature Cure Epoxy cures down to 35°F

Ultra-fast cure at normal temperatures

Extend your coating and flooring installation season, improve your productivity


Description

Epoxy.com Cold Temperature Cure Epoxy Resins allow installation to be done at low temperatures as low as 35°F., expanding your epoxy coating and epoxy flooring installation season. Epoxy.com Cold Temperature Cure Epoxy Resins can also be used in cold storage areas like food processing areas, where the temperature cannot be raised higher than 35° F or so. Normal cured epoxy typically requires 50°F or more.

Epoxy.com Cold Temperature Cure Epoxy Resins can also be used as a super-fast setting Epoxy Mortar or Epoxy Coating at normal temperatures.   Epoxy.com Cold Temperature Cure Epoxy Resins used at normal temperature give you quick turn around time for small jobs, or larger jobs that require a short turn-around time.

Typical Uses Of Epoxy.com Cold Cure Epoxy

  • Aisle Ways
  • Assembly Plants
  • Bakeries
  • Basement Floors & Walls
  • Block Walls
  • Bottling Plants
  • Break Rooms
  • Cafeterias
  • Canning Plants
  • Car Washes
  • Cells
  • Chemical Processing Areas
  • Chemical Pump Areas
  • Chemical Storage Area
  • Church Floors
  • Classroom Floors
  • Corridors
  • Educational Facilities
  • Entrances
  • Filters
  • Food Plants
  • Fork Lift Areas
  • Health Care Facilities
  • Hospitals
  • Kennels
  • Kitchens
  • Laboratories
  • Law Enforcement Facilities
  • Laundries
  • Leveling concrete
  • Loading docks
  • Locker Rooms
  • Machine Shops
  • Manufacturing Areas
  • Marine Surfaces
  • Meat Preparation Areas
  • Mortuaries
  • Nuclear Plant Floors
  • Offices
  • Patching concrete
  • Photography Processing Areas
  • Power Plants
  • Printing Plants
  • Produce Preparation Areas
  • Pools
  • Ramps
  • Research Facilities
  • Rest Rooms
  • Restaurants
  • Secondary Chemical Containment
  • Semiconductor Plants
  • Sewer Plants
  • Shops
  • Shopping Centers
  • Shower Rooms
  • Stores
  • Show Rooms
  • Supermarkets
  • Tanks
  • Veterinary Facilities
  • Water Plants
  • Warehouses
  • & many others

ADVANTAGE

  • Low Temperature Cure
  • Low Odor During Application and Cure- will not taint foods
  • Super-Fast Setting Epoxy at Normal Temperatures
  • Superior Stain and Chemical Resistance
  • Bonds Well to Cool, Damp Substrates
  • 100% Solids, Zero VOC - meets even the strictest low VOC standards
  • Excellent chemical resistance
  • Strong yet resilient
  • Built in flexibility
  • Sprayable
  • Meets USDA standards

SURFACE PREPARATION

Surface to receive Epoxy.com Low Temperature Cure Epoxy Primer, Low temperature Epoxy Coatings or Low Temperature Epoxy Mortars must be clean and sound. Remove all dirt, laitance, grease curing compounds and other foreign matter by sandblasting, or mechanical abrasion. Remove water and dust from all surfaces with an oil free blast immediately prior to application. See Epoxy.com' Surface Preparation Guide form more details.

MIXING INSTRUCTIONS

Temperature of Epoxy.com Low Temperature Cure Epoxy Primer, Low temperature Epoxy Coatings and.or Low Temperature Epoxy Mortars resin and hardener must be 50° F or above at time of mixing. Stir each component separately before blending. Mix two parts by volume of Part A with one part by volume of Part B for three minutes with a low speed electric drill motor equipped with a mixing paddle.

LIMITATIONS

If an Epoxy.com Low Temperature Cure Epoxy Primer, Low temperature Epoxy Coatings and/or Low Temperature Epoxy Mortars resin and/or hardener temperature is only 50°F but less than 75° when it is mixed remember it is going to take a lot longer to setup. Set up times of Epoxy.com Low Temperature Cure Epoxy Primer, Low temperature Epoxy Coatings and Low Temperature Epoxy Mortars will be longer than the time listed on the data sheets unless it is mixed at about 75°F. Low temperature cured epoxies set up much faster when the substrate and air temperature is 40 degrees or higher.  When possible to to install low temperature cured epoxy at temperatures of 40 degrees or more, unless a long cure time is not a problem.

SAFETY PRECAUTIONS

Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.

APPLICATION

Varies with the specific material.  Consult specific technical data sheet or contact Epoxy.com Technical Support at 321-206-1833 for more information.

New concrete should be at least 28 days old. Temperature of substrate must be above 50° F. DO NOT thin.

CLEANING

All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent.

TYPICAL APPLICATION PROPERTIES at 77° F

Mix Ratio 2:1 By Volume
Pot Life (200 gr.) 15 minutes @ 75° F.
Tack Free to Touch 2-3 hours @ 75° F; 14-16 hours @ 35° F.
Recoat 3-4 hours @ 75° F; 14-16 hours @ 35° F.
Light Traffic5-6 hours @ 75° F; 24 hours @ 35° F.
Final Cure 5 Days
Packaging (unit size) 3 gal., 15 gal.
Standard Colors Black, White, & Colors Listed Below  

Color Chart HereClick the picture of color card below  for a larger version of this picture of the color chart.
Please note:  The picture to the right is a photographic reproduction of the color card for this product.  The photo reproduction process and your monitor and/or printer will change these colors.  This chart is to give you an idea of the colors available and not intended for critical color selections.

Epoxy.com Cold Temperature Cure Epoxy

Epoxy.com Product #1 Cold Temperature Cure Epoxy Coating is 100% solids and  specially formulated coatings for cold temperature applications. Able to cure at temperatures as low as 35°F. It is has Zero (0) VOCs. Since it has no VOCs, it has no solvent so it meets the strictest possible standard for a low VOC coating. It is often used in coolers and food preparation areas that require constant low temperatures. Product #1 Cold Temperature Cure Epoxy Coating is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs.

Epoxy.com Product #2 Cold Cure Chemical Resistant Epoxy Coating a two component, 100% solids, Zero "0" VOC epoxy chemical resistant coating specially formulated for cold temperature applications.  Epoxy.com Product #2 Cold Temperature Cure Chemical Resistant  Epoxy Coating  is often used in coolers and food preparation areas that require low temperature epoxy coating installation is required. Epoxy.com Product #2 Cold Temperature Cure Chemical Resistant Epoxy Coating is also used for room temperature installations where a super-fast-cure is required to minimize turn around time. It is has Zero (0) VOCs. Since it has no VOCs, it has no solvent so it meets the strictest possible standard for a low VOC coating.

Epoxy.com Product #10  Cold Temperature Curing Version

Epoxy.com Product #24 Cold  Pigmented MortarCold Temperature Cure

Epoxy.com Product #28 Epoxy Mortar - Cold Temperature Version Honey Clear Mortar 4:1 Ratio a multipurpose colored epoxy binder for Epoxy.com Mortar Systems This all purpose epoxy resin is characterized as an excellent general purpose material with good clarity and color retention. It is essentially odorless and can therefore be used in occupied areas.

Epoxy.com Product #225 Water Cleanable Epoxy Mortar Kit Cold Cure Version -  includes Epoxy.com Product #224 Cold Cure along with the aggregate.  Mix the three components together for a ready to use system.

Epoxy.com Product #301 Cold Temperature Cure a faster version of Product #301 typically used in Cold Temperature Cure applications, or where a very fast set is needed

Epoxy.com Product #899 Cold Cure Epoxy Primer is a 100% solids low-mod, low viscosity,  low temperature curing Primer and Sealer. It may be used as a Primer for any Epoxy.com Products, as a stand alone sealer. It may also be combined with Epoxy.com Product #78 to form a Low-Mod mortar. Epoxy.com Product #899 Cold Cure Epoxy Primer is 100% solids with "0" (zero) VOC, which means it has virtually no order and will meet even the strictest low VOC standards. Epoxy.com Product #899 Cold Cure Epoxy Primer is specially formulated for cold temperature applications. Epoxy.com Product #899 Cold Cure Epoxy Primer is able to cure down to 35°F. Epoxy.com Product #899 Cold Cure Epoxy Primer is often used in coolers and food preparation areas that need to be kept at a constant temperature. Epoxy.com Product #899 Cold Cure Epoxy Primer is frequently used at room temperature applications where a super-fast curing system is required.

 

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems,
Since 1980 - Over 33 years
Florida & Vermont
USA


Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12 Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylates  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are batched on an individual order basis. Unless authorized by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance] [Coatings] [Conductive Flooring] [Applications] [Elastomeric Polyurethane Systems] [Epoxy Resin Systems] [Seamless Garage Floors] [High Temperature Epoxy] [Industrial Floors] [Injection] [Joint Systems / Sealants] [Methyl Methacrylate (MMA)] [Mortars / Grouts] [Novolac] [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips] [Product Guide] [Wood Filler] [Who We Are] [Guide Specs] [Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form] [Add this page to Favorites]

7316314