[Home] [Catalog of Products] [Where to Start with Epoxy] [Bonding Systems] [Chip Floors] [Chemical Resistance] [Coatings] [Conductive]  [Elastomeric Polyurethane Systems] [Garage Floors] [High Temperature] [Industrial Floors] [Injection] [Joint Systems & Sealants] [Mortars / Grouts] [Methyl Methacrylate (MMA)] [Novolac Epoxy]  [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips][Wood Filler] [Who is Epoxy.com] [Guide Specs][FAQs] [Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]

  Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980  

Epoxy.com Product #222

Water Based Epoxy Coating


DESCRIPTION
Epoxy.com ? Product #222 WATER BASED EPOXY COATING is a two component 100% reactive water based multifunctional epoxy resin coating. Product #222 is manufactured to produce the utmost in performance in a safe, water borne coating. Product #222 provides excellent resistance to salt intrusion, and excellent adhesion to most common construction substrates.

ADVANTAGES

  • WATER BASED - NO FLAMMABLE SOLVENT
  • FAST CURING AT AMBIENT TEMPERATURES (75°F)
  • ADHESION TO DAMP CONCRETE
  •  CHEMICAL RESISTANCE OVER A VARIETY OF SUBSTRATES
  • EXCELLENT CHLORIDE ION RESISTANCE
  • CAN BE BRUSHED, ROLLED OR SPRAYED
  • DOES NOT NEED TO BE REDUCED FOR SPRAYING

 

PHYSICAL PROPERTIES:

Ratio

2 parts A to 1 part B by volume

Solids

41.5% by volume minimum
55% by weight

Pot Life

6 hours at 75°F

Induction Time

30 minutes

Adhesion

Excellent to concrete, wood or steel

Viscosity

900 cps

Standard 595 Federal Color Numbers

White - 17875
Beige - 27778
Gray – 26622

Salt Spray 1000 hours, 2 coats

Exceeds

Abrasion Resistance ASTM D-968

Exceeds

USES

Epoxy.com ? Product #222 can be used as a sealer or topcoat for concrete, wood, steel, or galvanized metal. Product #222 can be used where high chemical resistant coatings are a must such as: marine environments, chemical and industrial plants, power plants, food processing areas, concrete parapet walls, bridge pier caps and concrete floors.

Product #222 is available in a variety of colors. Product #222 pigmented coating can be applied to concrete as early as three days after placement. The standard colors of Product #222 are white, beige and grey. Other colors are available as special order products.


APPLICATION PROCEDURES

STEEL SURFACE - Steel surfaces should be dry grit or sandblasted to a commercial gray metal finish as specified by the Steel Structures Painting Council SP 6. All work blasted shall be coated the same day with Product #1200 Zinc Rich Primer. For immersion service, blast to near white blast SSPC SP-10.

CONCRETE SURFACE: Concrete surfaces shall be cleaned to remove dirt, curing compounds, existing coatings or laitance to provide a clean, sound bonding surface. Cleaning may be accomplished with waterblasting, sandblasting, abrasive cleaning, or other methods that would achieve a similar result.

MIXING: Stir Component "B" thoroughly before mixing. Combine 2 parts by volume of "A" with 1 part by volume of "B" (mixing ratio 2:1). Mix for, not less than 3 minutes with a slow speed drill (300 to 600 rpm), and a Mixing Paddle. When mixing has been completed, cover mixed material and allow an induction time of not less than 30 minutes before application. Clean equipment with soap and water.

APPLICATIONS: Product #222 WATER BASED EPOXY COATING may be applied by brush, roller or spray. All Spray equipment must employ traps to prevent water and oil from contaminating coating.

COVERAGE: Product #222, will cover approximately 200 sq. ft./gal./coat depending upon surface texture. For best results, use two (2) coats.

SAFETY PRECAUTIONS

For industrial use only. Keep away from children. Refer to the Material Health and Safety Data Sheets (MSDS forms) pertaining to this product before using. Avoid contact with skin or eyes. In the event of any eye splash or contact, immediately flush with cold water for15 minutes and contact a physician. If skin contact occurs. wash with mild soap and water. The wearing safety glasses with side shields and impervious gloves is recommended.

CAUTION: Society of the Plastics Industry (SPI) Classification (2) and Warning for sensitization or other allergic responses. Avoid inhalation of vapor. Use good ventilation, particularly if the material is heated or sprayed. Prevent all contact with skin and eyes. Wear protective clothing, goggles, gloves and/or barrier creams.

Keep container closed. Use with adequate ventilation. Wash thoroughly after handling.

FIRST AID: In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before re-use.

FOR INDUSTRIAL USE ONLY

KEEP AWAY FROM CHILDREN

 

Exclaim

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

 352-533-2167  Technical Support
                         Norm Lambert, President - Technical Support Director 
                         info@epoxy.com
  
352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

Website:  www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylate  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

 

[Home] [Catalog of Products [MSDS in Acrobat Format]  [Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter