|Tech Data Sheets in Acrobat Format | MSDS in Acrobat Format | Online- Ordering Authorization Form | Home
|
|Tech Data Sheets in Acrobat Format | MSDS in Acrobat Format | Online- Ordering Authorization Form | Home
|
|
Product #66 Round Quartz Colored Fine -
a pure silica sand as the basic mineral. Silica is
an extremely hard abrasion resistant and chemically inert mineral, ideal for use
in conditions that - at times - may be severe. Flooring surfaces produced with
high density silica combined with
Industrial Flooring Resins produced by us
consistently show greater resistance to wear than surfaces filled with minerals
or many other resins or binders.
Product #67 Rounded Quartz Colored Medium Aggregates - Similar to Product #66, but larger. Product #68 Angular Quartz - Similar to Product #66 but angular. Product #69 50% Benzyl Peroxide (BPO) Powder Product #72 Grade 000 Silica Aggregate Product #73 Grade 00 Silica Aggregate Product #74 Grade 0 Silica Aggregate Product #75 Silica Filler is a very clean, specially graded natural silica aggregate. Product #75 is oven dried just prior to packaging, this makes it suitable for use in epoxy grouts. When mixed with EpoxySystems products, Product #75 makes excellent high strength products. Product #76 Epoxy Extender Product #77 Broadcast Sand Product #78 Self leveling filler Product #79 Ground Walnut shell anti-skid aggregate Product #80 Acrylic Sealer - a clear acrylic solution formulated to create a clear, non-yellowing protective coating. EPOXY SYSTEMS’ ACRYLIC SEALER provides a tough, UV and abrasion resistant film that effectively protects surfaces from moisture penetration, staining, dirt, dust, and wear. Providing a surface that is easy to clean and maintain, EPOXY SYSTEMS’ ACRYLIC SEALER is an excellent choice for both interior and exterior applications. Product #81 Epoxy Gel Extender is a specially formulated blend of fine granules and plasticizers for use with trowelable (thixotropic) epoxy materials. Product #82 Mortar Blend Aggregate System #83 Vinyl Ester - use in a wide range of industrial applications. ESI™ VINYL ESTER SYSTEMS can be installed as a coating, slurry, or mortar to meet various chemical and heat resistance needs. Product #84 Universal Primer- Used for EpoxySystems System #83 and many other EpoxySystems' Products Product #85 Vinyl Ester Mortar Product #86 Vinyl Ester Topcoat Product #86 Vinyl Ester Topcoat Product #87 General Purpose Vinyl Ester EpoxySystems’ Product #100 uses a unique epoxy technology which allows the contractor to install epoxy systems on new concrete (4-5 days old) without fear of moisture entrapment. Product #100 Exhibits greater than 100 times the permeability of standard epoxy slurries and mortars. Product #100 is used as a base for EpoxySystems’ Chip and Quartz systems and as a binder for EpoxySystems’ Resinous Mortar Systems, when moisture is a concern. [Catalog Page 1][Catalog Page 2][Catalog Page 3][Catalog Page 4] |
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all Departments 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy Systems™ Product Company ("ESI") warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. ESI warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of ESI. If any product fails to meet this warranty, the liability of ESI will be limited to replacement of any non-conforming material if notice of such non-conformity is given to ESI within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). ESI may in its discretion refund the price received by ESI in lieu of replacing the material. No customer, distributor, or representative of ESI is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of ESI. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. ESI reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Technical
Data Sheets in Adobe Acrobat Format][MSDSs
in Adobe Acrobat Format][Online-
Ordering Authorization Form]
|
