|
|
|
Product Application Guide
|
 | |
| |
| |
| |
|
Conductive and Electrostatic Dissipative Coatings and Flooring |
| |
|
Patching and Resurfacing - Concrete and Steel |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
Polyesters - Wood Fillers and Trowelable Repair Materials |
| |
| |
|
| Product #40 Silane Sealer - a clear, one (1) component sealer that provides excellent protection to concrete against attack from wet/dry, freeze/thaw cycles, and de-icing chemicals. It provides a hydrophobic "water-shedding" effect to masonry surfaces. It is a penetrating sealer that is repellent to liquid water but permeable to water vapor: a "breathable" sealer. |
| Product #41 Silane Sealer - Similar to #40 but with 40% Solids. |
| Product #80 Acrylic Sealer - a clear acrylic solution formulated to create a clear, non-yellowing protective coating. EPOXY SYSTEMS’ ACRYLIC SEALER provides a tough, UV and abrasion resistant film that effectively protects surfaces from moisture penetration, staining, dirt, dust, and wear. Providing a surface that is easy to clean and maintain, EPOXY SYSTEMS’ ACRYLIC SEALER is an excellent choice for both interior and exterior applications. |
| EpoxySystems' Product #201 Oil Stop Primer a two component, epoxy-amine undercoating designed to be compatible with petroleum based oil and greases. In many instances petroleum can penetrate the surface of concrete floors to the extent that the oil may not be removed by surface cleaning. If untreated, this oil may migrate back to the surface to cause a delamination. |
| Product #223 Clear Water Based Epoxy Curing Compound, Sealer and Bonding Agent is a two component water based epoxy curing that is used to both cure and seal concrete and to bond freshly placed concrete to existing concrete. It is easily pigmented. |
| EpoxySystems' Damp Primer-Sealer |
| EpoxySystems' Product #850 (50% Solids - Penetrating Epoxy Sealer) |
| Product #690 All Purpose MMA Primer and Mortar |
| Product #801 Fast Set Acrylic Sealer |
| Product #810 Two Component Polyurethane Primer for Polyurea Coatings |
| Product #824 Concrete Stain and Coating is a one component, water-repellant concrete stain. EPOXYSYSTEMS’ PRODUCT #824 penetrates existing concrete and imparts color and uniformity the surface without affecting the natural texture. Standard colors are white and gray many other colors of concrete are available. |
| Product #825 Epoxy Floor Sealer is a non-rewettable, polymer emulsion formulated for use with fast or normal setting floor underlayments. |
| Product #826 Floor Curing Agent - Minimum purchase of 10 each 55 gallon drums required. |
| Product #843 - High Solids Epoxy Primer |
| Product 850 (50% Solids - Penetrating Epoxy Sealer) - is a two-component penetrating epoxy sealer (with very high solids) designed for superior protection of new concrete or for prolonging the serviceability of partially-deteriorated concrete. The sealer is a low to medium viscosity material and is capable of providing an effective membrane barrier to inhibit moisture migration and corrosive chemical penetration. In the cured state ESItm Product #850 allows moisture vapor transmission; it seals off moisture entry but still allows the concrete to breath. When applied to concrete place and finished in accordance with standards defined in ACI 201 (Guide to Durable Concrete), Product #850 greatly improves wear resistance of the concrete surface, slows down the corrosion of reinforcing steel and adds many years' life to the structure. Product #850 has a solids content of 50% after curing. It may be applied to dry surfaces at temperatures of 40°F (0°C) or above. |
| Product #851 Epoxy Siloxane |
| Product #877 Zinc Rich Primer |
| Product #879 Galvanized and Aluminum Primer |
| Product #886 Water Base Primer for ESI Deck System |
| Product #887 Metal Primer for Deck System |
| Product #888 Epoxy Primer for Deck System |
| Product #889 Concrete Primer for Deck System |
| Product #890 Primer for Multi-Use System |
| Product #891 Metal Primer for Multi-Use System |
| Product #892 Epoxy Primer for Multi-Use System |
| Product #893 Water Based Epoxy Primer for Multi-Use System |
| Product #895 Acrylic Primer |
| Product #897 Polyurethane Metal Primer for Caulk |
| Product #898 Polyurethane Concrete Primer for Caulk |
| Product #899 Epoxy Primer - a damp primer the is a 100% solids Low-Mod Low Viscosity Primer and Sealer. It may be used as a primer for any Epoxy Systems’ ™ product, or as a stand alone sealer. |
| Product #950 Joint Sealant Primer |
| Product #1100 Rewetting Adhesion Promoter |
| Product #1200 Epoxy Zinc Rich Primer |
|
| Product #1 All Purpose Coating - a 100% solids epoxy Hi-Build epoxy coating used for high foot and light forklift traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative waterproof coating for walls, floors, tanks, etc Available in normal, fast, and Cold Temperature Cure versions. |
|
| Product #1Fast - Shorter Potlife, and faster setting version of Product #1 |
|
| Product #1Cold Temperature Cure - This is a version of Product #1 that sets even faster than Product#1 Fast. Typically used in colder temperatures, or where an very fast cure is required. |
|
| Epoxy Systems Product #2 Chemical Resistant Coating - a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Available in normal, fast, and Cold Temperature Cure. |
|
| Product #2 Fast - Shorter Potlife, and faster setting version of Product #2 |
|
| Product #2 Cold Temperature Cure - This is a version of that sets even faster than Product#2 Fast. Typically used in colder temperatures, or where an very fast cure is required. |
|
| Product #211 Polyamide Epoxy Coating - Ideal for bonding to steel and similar surfaces |
|
| Product #212 - Anti-Fouling Coating - Special orders in quantity only available. |
|
| Product #213 Decoupage Epoxy |
|
| Product #214 Tabletop Resin - an all-purpose, low viscosity Epoxy System for coating wooden counter tops, tabletops, bar tops and similar applications. It forms a glossy, hard surface, which is resistant to stains. It has excellent clarity and color retention. It is essentially odorless and can therefore be used in occupied areas |
|
| Product #215 Epoxy Polyamine - a high solids, epoxy-polyamide combination, chemical curing, quick- drying resin system. Product #215 produces a ceramic like coating on masonry, concrete plaster, cement, asbestos board, wood, fiberglass, metal and most other rigid materials. Formulated for applications that require superior adhesion and durability, chemical |
|
| Product #216 Coal Tar Epoxy is a two component coal tar epoxy coating, black in color, used to protect steel, concrete structures, timber, and other construction materials in corrosive environments. It meets all requirements of Corp. of Engineers C-200, Federal Specification DOD-P-23236 (SHIPS), and SSPC 16-91. |
|
| Product #217 Floor Coating Primer |
|
| Product #218 Floor Coating Intermediate |
|
| Product#219 Floor Coating Top Coat |
|
| Product #220 Rebar Touch Up Epoxy Coating is a two component, 70% solids epoxy coating specially manufactured to touch up damage epoxy coated rebar or to coat rebars not previously protected against corrosion. |
|
| Product #222 Water Based Epoxy - Epoxy Systems’ Product #222 WATER BASED EPOXY COATING is a two component 100% reactive water based multifunctional epoxy resin coating. Product #222 is manufactured to produce the utmost in performance in a safe, water borne coating. Product #222 provides excellent resistance to salt intrusion, and excellent adhesion to most common construction substrates. |
|
| Product #223 Clear Water Based Epoxy Curing Compound, Sealer and Bonding Agent is a two component water based epoxy curing that is used to both cure and seal concrete and to bond freshly placed concrete to existing concrete. It is easily pigmented. |
|
| Product #226Fast Setting Water Based Epoxy is a Fast Setting Water Based Epoxy Coating is a two component, 100% reactive, water based, multi functional epoxy resin coating. PRODUCT #226 is manufactured to produce the utmost in performance in a safe, water borne coating. PRODUCT #226 provides excellent resistance to salt intrusion, and excellent adhesion to most common construction substrates. Product #226 is VOC Compliant, Fast Curing, and tintable with standard colorants. It is Internally Flexibilized so it can be applied to metals and plastics. It is water-reducible and easily applied. |
|
| Product #250 Water Tank Type Coating is a 100% solids, moisture- insensitive epoxy coating, containing no solvents. It is mixed at a 2:1 ratio, produces a tough, chemical and abrasion-resistant coating for dry or damp concrete, wood or steel surfaces. |
|
| Product #255 Mastic High Build Epoxy Coating is a 100% solids, moisture-insensitive, epoxy resin system. When mixed at a 1:1 ratio, by volume, it produces an excellent coating for dry or damp concrete, wood or steel surfaces. It iss used on piles, piers, and concrete or steel tanks where concrete or steel needs to be protected from abrasive environments. |
|
| Product #256 Impact and Chemical Resistant Epoxy Coating. |
|
| EpoxySystems'™ Product #315 Polymeric Multi-Colored Flake Floor Resurfacing System |
|
| Product #315BC Polymeric Coating and Base Coat for the 315Chip Flooring System, It can also be used as a stand alone coating. |
|
| Product #315BC - Fast Same as Product #315BC Polymeric Coating for Base Coat for the 315Chip Flooring System , but with a fast cure. |
|
| Product #315BC-Cold Same as Product #315BC Polymeric Coating for Base Coat for the 315Chip Flooring System , but with a cold temperature cure. |
|
| Product #316 Fast Set Flooring - a 100 % solids fast setting two-component epoxy resin system. Is made to set fast even in temperatures below freezing. It is recommended for flooring, injection or anchor-bolt grouting in the neat state or as a mortar when mixed #75 Filler. It exceeds most requirements of ASTM C-881-99, Types I and IV , Grade 1, Class A. |
|
| Epoxy Systems Product #633 Epoxy Novolac Coating |
|
| EpoxySystems' Vinyl Ester Systems |
|
| Product #401 Urethane Coating - a two (2) component, high-solids, urethane coating. Urethane Coating is a two (2) component, high-solids, urethane coating. It is a superior coating that provides the ultimate in weather resistance. It offers outstanding abrasion resistance, excellent chemical resistance and color retention in severe conditions. |
|
| Product #402 Urethane - a two component1 chemical resistant polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention. It used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities. |
|
| Product #403 Urethane Coating Aliphatic |
|
| Product #404 Fast Cure Urethane Membrane |
|
| Product #405 Fast Cure Urethane Topcoat. |
|
| System #410 Urethane Traffic Bearing Membrane System is a tough, resilient system with excellent elongation. It is applied as a 3-step system - consisting of a primer, traffic bearing membrane - 2 coats, and sealer. It cures at ambient temperatures and is impermeable to moisture, oils, mild adds, gasoline, and alkalies. |
|
| Product #411 Primer for System #410 |
|
| Product #413 Liquid Flashing for System #410 |
|
| Product #414 Caulk for under System #410 |
|
| Product #415 Elastomeric Membrane a liquid applied, single component, moisture-cured polyurethane. It is the major component of all deck coating systems like the 450 and 450X2 systems. Composition: Liquid-applied, single-component, moisture-cured, polyurethane elastomer. All materials shall be delivered to the jobsite in unopened containers clearly marked and labeled. |
|
| Product #416 Polyurethane Coating a moisture-cured, liquid applied, polyurethane, based on Aliphatic Isocyanides in combination with additives and pigments to produce a wear resistant, protective and decorative floor coating, for interior and exterior applications. It is primarily used as the protective topcoat of the 450 and 450X2 deck coating systems, but when used with the proper primer, can be used as a stand alone coating. |
|
| Product #641LV High Temp Resistant Mortar is a two component highly cross-linked novolac epoxy resin system. It is especially formulated to be used as a high temperature grouting or laminating resin. It is used to protect concrete, steel and other substrates from high temperatures and corrosion. |
|
| Product #642 Multifunctional High Chemical Resistance Epoxy Coating/Bonder |
|
| Product #644 High Temp Chemical Resistant Coating. Similar to 641LV, but with fillers to make it thicker. |
|
| Product #645 High Temp Coating |
|
| Product #690 All Purpose MMA Primer and Mortar |
|
| Product #1800 Fast Setting Brushable Polyurea Coating |
|
| Product #1810 - Elastomeric Polyurea lining |
Seamless and Industrial Flooring
Most of EpoxySystems' Coatings can also be used to make seamless floors. Some of the Seamless Flooring Systems below will also benefit from the use of a Primer. Contact EpoxySystems' Technical Support for details.
| Epoxy Systems Product #10 a 100% solids Lo-Mod Low Viscosity adhesive used as a binder for epoxy mortar systems in patching and grouting applications, as a seal coat for non-skid surfaces outside, and as a primer to insure high bond strength for coatings and patches. | ||||||||||||
| Product #10FAST Lo-Mod Adhesive -Fast Cure | ||||||||||||
| Product #10COLD Lo-Mod Adhesive Cold Temperature Cure | ||||||||||||
| EpoxySystems' Product #11 a 100% solids flexible epoxy joint filler for saw-cut joints of concrete slabs on grade, or to repair existing slabs. Product #11 absorbs the impact and shock of heavy loads and steel wheeled traffic, preventing erosion of control joint edges. | ||||||||||||
| EpoxySystems' Product #12 a two component, seamless 100% solids epoxy primer system with High Chemical Resistance and High Bond Strength. The epoxy may be applied as a primer for most High End Industrial coatings, like Epoxies, MMA, Polyurethane's, Vinyl Esters, Polyesters, etc. | ||||||||||||
| EpoxySystems' Product #15 Chemical Resistant Flooring Resin - a two component, seamless 100% solids epoxy resurfacing system with High Chemical Resistance. It may be applied as a coating, or combined with silica sand or EpoxySystems' multi-colored quartz aggregate to produce a durable, easy to maintain floor, on both new and old surfaces. | ||||||||||||
| Product #16 Epoxy Mortar Resin - a two-component, 100% solids epoxy resin system, mixed at a 1:1 ratio by volume. Epoxy Systems’ Product #16, mixed with up to 3 parts dry EpoxySystems’ Product #75 Filler produces an economical, high-strength epoxy mortar. Product #16 exceeds the requirements of ASTM C-881-78, Grade II, Classes A, B & C, Types I & III. Product #16 is recommended for use in dry environments only. | ||||||||||||
| Product #17 Decorative Stone Overlays - a two component, 100% solids high-mod epoxy adhesive used for bonding stone and other aggregates in all types of flooring applications. Some uses would include patios, pool decks, walkways and other areas where a long wearing and decorative system is desired. | ||||||||||||
| Product #18 General Purpose Epoxy - a hard set epoxy compound formulated for general use. Product #18 cures at room temperature and is a low viscosity system. This durable, resilient material requires no post curing to achieve permanent bond strength. Mixing ratio of 1 to 1 makes this product easy to use. Product #18 solves many difficult bonding, and epoxy mortar problems. Product has the ability to bond to a variety of substrates including cannot dry and hard to dry surfaces. | ||||||||||||
| Product #19 Epoxy Mortar - a multi-function liquid applied, 100% solids epoxy binder and mortar system with excellent wear, and chemical resistance. Product #19 is an excellent general purpose material with excellent clarity and color retention. It is essentially odorless and so it can be used in occupied areas. | ||||||||||||
| Product #20 Epoxy Grout - a moisture insensitive, two-component, 100% solids epoxy resin system manufactured specifically for use in temperatures of 40°F and below. It is recommended for injection or anchor-bolt grouting in the neat state or as a mortar when mixed with up to 3 1/4 parts of Product #76 -Epoxy Filler (by volume). PRODUCT #20 exceeds most requirements of ASTM C-881-90, Types I, Grade 1, Class A. | ||||||||||||
| Product #21 Pumpable Mortar can be used underwater - a Pumpable Epoxy Mortar that is a moisture insensitive, two-component, 100% solids epoxy resin. This material is specifically designed for use in marine environments, but can be used in wet or dry strippable form applications. #21 can be pumped or poured into the void created between the existing structure and the Epoxy Systems’ Corrosion Free Jacket. Dewatering is not required. | ||||||||||||
| Product # 22 Underwater Epoxy Mortar - Pourable Epoxy Mortar that is a moisture insensitive, two-component, 100% solids epoxy resin. This material is specifically designed for use with the Epoxy Systems’ Fiberglass Systems & Shapes. Can also be used as self-leveling flooring. | ||||||||||||
| Product #23 - Similar to #22 but in 1:1 mix ratio | ||||||||||||
| Product #24 Pigmented Mortar - is a multipurpose colored epoxy binder for EpoxySystems’ Mortar Systems This all purpose epoxy resin is characterized as an excellent general purpose material with good clarity and color retention. It is essentially odorless and can therefore be used in occupied areas. | ||||||||||||
| Product #24 Fast Pigmented Mortar - Fast Cure | ||||||||||||
| Product #24 Cold Pigmented Mortar - Cold Temperature Cure | ||||||||||||
| Product #25 Epoxy Mortar Kit standard - a 100% solids epoxy resin and specially selected aggregate system. Units are preproportioned for ease of mixing and use on the jobsite. It is a flowable, self-leveling grout, with handling and physical characteristics superior to similar grouts. | ||||||||||||
| Product #26 Epoxy Mortar Kit - a 100% solids epoxy resin and specially selected aggregate system which produces a flowable, self-leveling grout, with handling and physical characteristics superior to similar grouts. It is designed for floor resurfacing where high strength and short down time are needed. Units are preproportioned for ease of mixing and use on the jobsite. | ||||||||||||
| Product #27 Slow Cure Mortar | ||||||||||||
| Product #28 Epoxy Mortar - Honey Clear Mortar 4:1 Ratio a multipurpose colored epoxy binder for EpoxySystems’ Mortar Systems This all purpose epoxy resin is characterized as an excellent general purpose material with good clarity and color retention. It is essentially odorless and can therefore be used in occupied areas. | ||||||||||||
| Product #29 Cold Temperature Cure Mortar is a specially formulated binder for cold temperature applications. Able to cure at temperatures as low as 35°F. They are often used in coolers and food preparation areas that require constant low temperatures. Product #29 Cold Temperature Cure EPOXY MORTAR is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs. | ||||||||||||
| Product #203 Cold Temperature Cure Polymeric Primer - a specially formulated primer for cold temperature applications. Able to cure at temperatures as low as 35°F. It is often used in coolers and food preparation areas that require constant low temperatures. It is frequently used in room temperature applications to meet super-fast cure, limited shutdown needs | ||||||||||||
| Product #204 Cold Temperature Cure Polymeric Coating - is a specially formulated coating for cold temperature applications. Able to cure at temperatures as low as 35°F. It is often used in coolers and food preparation areas that require constant low temperatures. It is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs. | ||||||||||||
| Product #205 Polymeric Flooring Resin | ||||||||||||
| Product #206 Cold Temperature Cure Pigmented Polymeric Flooring Resin is a specially formulated binder for cold temperature applications. Able to cure at temperatures as low as 35°F. It is often used in coolers and food preparation areas that require constant low temperatures. Product #206 Cold Temperature Cure POLYMERIC MORTAR is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs. Is available in clear or colors. | ||||||||||||
| EpoxySystems'™ Product #315 Polymeric Multi-Colored Flake Floor Resurfacing System | ||||||||||||
| Product #315BC Polymeric Coating and Base Coat for the 315Chip Flooring System, It can also be used as a stand alone coating. | ||||||||||||
| Product #315BC - Fast Same as Product #315BC Polymeric Coating for Base Coat for the 315Chip Flooring System , but with a fast cure. | ||||||||||||
| Product #315BC-Cold Same as Product #315BC Polymeric Coating for Base Coat for the 315Chip Flooring System , but with a cold temperature cure. | ||||||||||||
| Product #316 Fast Set Flooring - a 100 % solids fast setting two-component epoxy resin system. Is made to set fast even in temperatures below freezing. It is recommended for flooring, injection or anchor-bolt grouting in the neat state or as a mortar when mixed #75 Filler. It exceeds most requirements of ASTM C-881-99, Types I and IV , Grade 1, Class A. | ||||||||||||
| System #430 Elastomeric Multi-Colored Decking System is a liquid-applied, single-component, moisture-cured, polyurethane deck covering system. For waterproofing patios, sundecks, stairways, balconies, etc. Product #430 can be used on all decks where a skid-resistant, long-lasting, wear-resistant, water-proof surface is required. It may be used on new decks as well as on old concrete decks which are damaged, or cracked. The system is suitable for exterior as well as interior applications in all kinds of climates. The coating retains its elastomeric properties in below freezing weather as well as in very hot climates. | ||||||||||||
| Product #440 Light Stable Deck Membrane | ||||||||||||
| System #450 Elastomeric Flooring system | ||||||||||||
| System #450 Mechanical Room Flooring System - Liquid-applied, single-component, moisture-cured, polyurethane deck covering system. | ||||||||||||
| System #450X2 Urethane Decking System double strength | ||||||||||||
| System #450HT- High Tensile Strength version of the 450 system for extra heavy duty applications | ||||||||||||
| Product #451 Aromatic Polyurethane Coating | ||||||||||||
| Product #452 Polyurethane Membrane Standard | ||||||||||||
| Product #453 Polyurethane Membrane Slope Grade | ||||||||||||
| Product #454 Polyurethane Membrane non-gassing | ||||||||||||
| Product #455 Polyurethane Membrane Grading Material | ||||||||||||
| Product #456 Urethane Coating | ||||||||||||
| Product #457 Polyurethane Membrane 100% Solids | ||||||||||||
| Product #458-2Component Urethane Coating | ||||||||||||
| Product #462 High Tensile Strength Urethane Deck Membrane | ||||||||||||
| Product #466 High Tensile Strength Aliphatic Top Coating | ||||||||||||
| Product #469 Elastomeric Membrane Deck Grade | ||||||||||||
| System #470 Multi Use Elastomeric System | ||||||||||||
| Product #471 Multi Use Base Coat | ||||||||||||
| Product #472 Multi Use HT | ||||||||||||
| Product #473 Aromatic Urethane Coating for #470 System | ||||||||||||
| Product #474 Aliphatic Urethane Coating for #470 System | ||||||||||||
| Product #475 Catalyst for #470 System | ||||||||||||
| System #480 Elastomeric Deck | ||||||||||||
| Product #490 Athletic and Driveway Surface is a one part liquid applied coating with good ultraviolet light resistance. PRODUCT #490 is designed for use on pool decks, tennis courts, asphalt driveways, and concrete surfaces. This product is recommended for foot traffic areas to reduce slipping on commercial and industrial floors. Due to the waterbased formulation of the product, it can be installed in areas where solvent based coatings are objectionable due to their odors and fire hazards. This material can also be applied over damp as well as dry surfaces | ||||||||||||
| Product #641LV High Temp Resistant Mortar is a two component highly cross-linked novolac epoxy resin system. It is especially formulated to be used as a high temperature grouting or laminating resin. It is used to protect concrete, steel and other substrates from high temperatures and corrosion. | ||||||||||||
| Product #1501 Orange Peal Mortar Regular Cure | ||||||||||||
| Product #1501Fast- Orange Peal Mortar Fast Cure | ||||||||||||
| Product #1501Cold- Orange Peal Mortar Cold Temperature Cure | ||||||||||||
| Product #1502 Cove Resin | ||||||||||||
| Product #1502Fast- Cove Resin Fast Set | ||||||||||||
| Product #1502Cold - Cove Resin Cold Temperature Cure | ||||||||||||
| Product #1503- Epoxy Mortar Resin with Fly Ash | ||||||||||||
| Product #1503 Fast- Epoxy Mortar Resin with Fly Ash, Fast Cure | ||||||||||||
| Product #1503Cold - Epoxy Mortar Resin with Fly Ash,
Cold Temperature Cure | ||||||||||||
| Methyl Methacrylate
- MMA
|
Conductive and Electrostatic Dissipative Coatings and Flooring
| Product #671 Conductive Primer/Sealer - EpoxySystems’ Product #671 is a low viscosity, two component, carbon filled, polyamide modified conductive primer/sealer formulated with special wetting agents to provide maximum penetration into concrete surfaces. Product #671 is ideal for both new and old concrete surfaces. Product #671 provides excellent resistance to wear, and can be used either alone or as a conductive sealer or as a conductive primer when used with EpoxySystems’ product #674 Electro-Static Dissipating Urethane Topcoat and EpoxySystems’ Conductive Systems. |
| Product #672 Conductive Epoxy |
| Product #673 Conductive Terrazzo |
| Product #674 Electrostatic Dissipating Urethane Topcoat |
| Product #675 Electrostatic
Dissipating Water Borne Epoxy Topcoat-a pigmented, water emulsion epoxy
electro-static dissipative finish designed to have maximum penetration into
concrete surfaces to provide high bond strength and adhesion. It has very low
odor and can be used in occupied areas as a finish sealer in Thin-Film
Electro-Static Dissipative Coating Systems. |
Crack Repair (Wet and Damp above 32/F, Dry 0/F and above)
| Surface sealing for injection - Cannot dry, damp, and dry surfaces
| ||||||||||||||||||||||
| Pressure injection by Epoxy
| ||||||||||||||||||||||
| Pressure Injection by Urethane
| ||||||||||||||||||||||
| Gravity Feed with Methyl Methacrylate (MMA)
| ||||||||||||||||||||||
| Injection Equipment and tools
|
| Low Viscosities (Horizontal)
| ||||||||||||
| High Viscosities / Gels (Horizontal, Vertical and Overhead)
|
| Broadcast Overlays - Where Anti-Skid Required - To install antiskid overlays you can use multiple coats of Coatings, Elastomeric Decking Systems, and/or Chemical Resistance and Chemical Containment with antiskid. Contact EpoxySystems' Technical Support Department for more details. |
| Smooth Overlays - Where No Anti-Skid is Required
To install smooth overlays you can use multiple coats of Coatings, Elastomeric Decking Systems without antiskid, and/or Chemical Resistance and Chemical Containment without the antiskid. Contact EpoxySystems' Technical Support Department for more details.
|
| Product #21 Pumpable Mortar can be used underwater - a Pumpable Epoxy Mortar that is a moisture insensitive, two-component, 100% solids epoxy resin. This material is specifically designed for use in marine environments, but can be used in wet or dry strippable form applications. #21 can be pumped or poured into the void created between the existing structure and the Epoxy Systems’ Corrosion Free Jacket. Dewatering is not required. |
| Product # 22 Underwater Epoxy Mortar - Pourable Epoxy Mortar that is a moisture insensitive, two-component, 100% solids epoxy resin. This material is specifically designed for use with the Epoxy Systems’ Fiberglass Systems & Shapes. Can also be used as self-leveling flooring. |
