|Tech Data Sheets in Acrobat Format | MSDS in Acrobat Format | Online- Ordering Authorization Form | Home
|
|Tech Data Sheets in Acrobat Format | MSDS in Acrobat Format | Online- Ordering Authorization Form | Home
|
CommentsHello,I need technical assistance on pressure stabilization of wood with a polymer type product.
Comments
CommentsI'm very interest in epoxies and plastics, because of my line of work.
Comments
Comments
Commentsbill i have reviewed several of your products, i'am impressed ! i'll call you for more info.
CommentsI am very interested in chip flooring, as well as some other coatins, and would appreciate any information that you could send our company. We are currently buying from National Polymers and a couple vinly and stone chip suppliers but are not completly satisfied. Any information on material, supplies, priceing, and an account/sales reps name would be greatly appreciated. Sincerely, Dave Esser
CommentsHi, I like your side but missing represantation or distributor in Europe. Pls forward asap. Thanks Wolfgang
Comments
Commentsasd
Commentsasd
CommentsPlease send me a list of dealers and or installers in the Cleveland Area. I am in need of a garage floor resurfacing. Thank You My phone number is 216-533-2893.
CommentsHi,just thought I would leave these few lines here due to the concern I still hold and have in my mind to eventually submitt into this wonderful world of electricity. So stay tuned to my calling,for I've have not forgotten the verbal permission... recieved some years back now. Anyway as a reminder the MAN with the A.M.along with the S.C. technology you hold there will be on the rise soon.-THANKS-
CommentsHi I am interested to know more of your product. Are you supplying only the epoxy material or are you also an installer? Please let me know before I go further with my enquiries. thank you.
CommentsDo you have dealers in San Francisco or the SF Bay Area?
Comments
CommentsVery informative web site. One concern is technical service. in this topic, it should have some more info. e.g. most found problems when you formulate this resin then the solution. If anything more complicate please contact to epoxy system inc.
CommentsMy name is Richard Twarowski and I am looking for a sprayable material that is removable and also it needs to be acid resistant. I would like to use such a material to do acid engraving. We work with the molding industry and apply the texture to molds. I would appreciate any help. Thank you Richard Twarowski Comments
CommentsHello, What should I use to remove a fully cured BPA Novolac epoxy? Thanks for your time. Sincerely, M. Glynn
Commentsi am looking for coaltar urethane epoxy for pipe coating equivalent to protegol ut 32-10 r of shell bautechnik with an estimated quantity of 12 mt. this is a solventless highbuild epoxy applied by airless spray for sea exposed structures.
CommentsWOW !!! Nice Site. Help me to find the product stated below: Copper Epoxy (6” tube of 114 gms.) Product consists of two components that are always in direct contact with the extruded metal formulation. The hardening process is activated only after mixing one into the other. Features Harden with 5 to 10 minutes even in tump surfaces. Cures under water Good chemical corrosion resistance Good shelf life After curing it can be drilled, machine and tapped. Physical Properties (Approx.) Tensile Strength 8,000 psi Compressive Strength 19,000 psi Shear Strength 1090 psi Hardness D90 SHORE Operating Temperature 390 °F or (198°c)max Curing Time 3 – 5 Minutes Full Curing Time 45 Minutes Let me have an update. With Regards, Mohit
CommentsI have reciently spent this last year working with epoxy resin as a medium alongside tiles and just happened to go to your web page first time last night.As I might add a verry helpfull site at makeing me understand all about the products you carry.I hope to use you in the future and would like to understand more about resins and perfecting the beautifull finished look.looking forward to doing some future buisness . MarkDeLima
CommentsCAN YOU PLEASE SEND US SOME INFO ON THE PRODUCTS YOU SUPPLY. WE ARE STARTING UP OUR OWN BUSINESS AND WE NEED TO FIND A SUPPLIER. Webmaster's note: We do not answer questions here. This is just the guest book. Send your questions to info@epoxy.com . Thank you!
Comments
Commentsa very good idea, best wishes from germany Heinrich Liesen Germany Name:
Comments
|
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all Departments 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy Systems™ Product Company ("ESI") warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. ESI warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of ESI. If any product fails to meet this warranty, the liability of ESI will be limited to replacement of any non-conforming material if notice of such non-conformity is given to ESI within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). ESI may in its discretion refund the price received by ESI in lieu of replacing the material. No customer, distributor, or representative of ESI is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of ESI. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. ESI reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Technical
Data Sheets in Adobe Acrobat Format][MSDSs
in Adobe Acrobat Format][Online-
Ordering Authorization Form]
|
