APPLICATION
SURFACE
PREPARATION
Surface Preparation is the most critical portion to any successful resinous flooring system application. All substrates must be properly prepared as outlined in the EpoxySystems' SURFACE PREPARATION TECHNICAL BULLETIN. Work must be performed by trained or experienced contractors or maintenance personnel. The Epoxy Systems, Inc.'s technical service department is pleased to answer any questions.
INSTALLATION
EpoxySystems' CONDUCTIVE can be installed as a coating system or as a finish coating for EpoxySystems' MORTAR SL AND SLT and EpoxySystems' MORTAR
STD systems. Consult your EpoxySystems'
REPRESENTATIVE for specific installation instructions.
AVAILABILITY
EpoxySystems' Resins are available throughout the United States, Canada, and a number of other
countries. Contact the EpoxySystems' REPRESENTATIVE in your area for details.
TECHNICAL
SERVICE
Epoxy Systems, Inc. provide services and consultations on material selection, specification,
troubleshooting,
and other information on the proper repair and protection
of concrete surfaces. EpoxySystems' REPRESENTATIVES are available to assist you at any time. CALL 352-489-1666.
Epoxy Systems™ Product Company ("ESI") warrants for a period of one (1) year that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of ESI. If any product fails to meet this warranty, the liability of ESI will be limited to replacement of any non-conforming material if notice of such non-conformity is given to ESI within (1) one year of delivery of materials, ESI may in its discretion refund the price received by ESI in lieu of replacing the material. No customer, distributor, or representative of ESI is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of ESI. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. ESI reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. ESI'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND ESI SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. No returns on non-stocking colors, or items. No returns after 10 days. Returns must be unopened containers. All returns must be authorized in advance. Restocking charges will apply to returns. No returns on non-list priced items. All Returns are for account credit only. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.