[Epoxy Home] [Catalog of Products] [Where to Start] [Guide Specs] [Epoxy Installation Guides] [Blog Posts] [Epoxy Bonding Systems] [Chip Floors] [Chemical Resistant Epoxy] [Seamless Coatings] [Conductive Epoxy Flooring] [Crack Injection of Concrete & Wood] [Applications] [Elastomeric Polyurethane Systems]  [Seamless Garage Flooring Resins] [High Temperature Epoxy Resins] [Seamless Industrial Floors] [Joint Systems & Sealants] [Methyl Methacrylate MMA ] [Novolac Epoxy Resins] [Epoxy Mortars & Grouts] [Epoxy Novolac] [Primers Sealers] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Epoxy Installation Tips] [Who We Are]  [Epoxy Tech Data Sheets in Acrobat] [Product MSDS Sheets] [Online Order Authorization Form][Contact UsPhone 352.489.1666

  Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980  

Line

Epoxy.com Seamless Flooring Chip

(Flooring Flakes)

Line

USES:

  • Aisle Ways
  • Bakeries
  • Basement Floors
  • Bottling Plants
  • Break Rooms
  • Cafeterias
  • Canning Plants
  • Car Washes
  • Commercial Kitchens
  • Cells
  • Church Floors
  • Classroom Floors
  • Corridors
  • Educational Facilities
  • Entrances
  • Epoxy Stone Recoating
  • Food Plants
  • Garages
  • Grocery Stores
  • Health Care Facilities
  • Hospitals
  • Kennels
  • Kitchens
  • Laboratories
  • Law Enforcement Facilities
  • Laundries
  • Locker Rooms
  • Machine Shops
  • Marine Surfaces
  • Meat Preparation Areas
  • Mortuaries
  • Nuclear Plant Floors
  • Operating Rooms

 

Note: Epoxy.com Flake Flooring (Chip Flooring) is not available in retail (off the shelf) outlets.  It is only available from select authorized applicator/distributors or directly from Epoxy.com, who will give you the technical support that you need to install it properly. Do not accept the poor imitations, they will not perform like the REAL THING. Be sure it has the Epoxy.com logo (above) on the label.

We get many calls from customer who are upset with the quality of lower end retail products Purchased at Retail Stores, not lasting.  They think that we make the product for the Big Box Home Improvement Stores.  We do not.  We do not supply technical support for products purchased at these national retailers, because we do not make their systems.  Please contact these retailers to report your problems, because we cannot help you.  We appreciate your understanding

If you want to purchase a high quality system, backed with proper advise and technical support, then please contact us.

Editors Note:  This page and many other pages on this site contain picture thumbnails. Thumbnails are smaller versions of larger pictures.  Thumbnails are used to speed the loading of a web page.  To view the larger version of these thumbnails, simply left click the thumbnails the same way that you would click any other link.  The larger version of the picture will then load.

Floors have a special role to play in interior design. The heavy technical demands made on floors often make the use of Mvc-263s.jpg (41651 bytes)certain decorative products simply impossible. The use of color chips can change all that! Color chips are increasingly being used in combination with "wet" products such as Epoxy.com Product #315 Polymeric Multi-Colored Chip Floor (Flake Floor) Resurfacing System to create decorative floors with more to offer than other ornamental products...Quality! Due to their easy application, these products can be used by both professionals and skilled do-it-yourself enthusiasts.

The concept is simple. It is a combination of chips and flooring resin. A new product is "born". The flooring resin plays a leading role in the quality of the flooring system. The color chips provide the additional decorative effect.

What is new and unique?

At last there is a high quality seamless floor finish which can be provided in every desirable color combination. Flooring experts have been using this process for a long time. Epoxy.com a division of Epoxy Systems, Inc., which is responsible for the quality of the floor resin, has not stood still over the years. It has developed various new types of resins like Epoxy.com Product #315. It even has developed a water-based resin system for walls. These resins are easy to use, by any skilled do-it-yourselfer or coating professional. For potential customers, both commercial applicators and the do-it-yourselfer, the final result is most certainly new.

Selecting your color

First pick the primary (background color).  This color should be at least 40 to 50% of you total mix.  The background color is picked from this color chart:

     mcblack.jpg (218472 bytes)

Color Chart HereClick the picture of color card below  for a larger version of this picture of the color chart.
Please note:  The picture to the right is a photographic reproduction of the color card for this product.  The photo reproduction process and your monitor and/or printer will change these colors.  This chart is to give you an idea of the colors available and not intended for critical color selections.

Then pick 2 or more accent or contrasting colors from the chart below, or the chart above:

chipcolors.jpg (241664 bytes)

Decide what proportions you want of each color by percent.  And we will make it to your order, in multiples of 55 lbs.

   

Three easy steps of applicationcwgray.jpg (176224 bytes)

  The "sandwich" system

Epoxy.com Chip System (Flake Flooring System) is easier to use than most people think. This ease of use also automatically means that work can be done more quickly.

Saving time and money, while increasing quality!

Step 1: A layer of flooring resin is applied to a suitable substrate. MVC-737S.JPG (145593 bytes)

Step 2: The application of the color chips (color flakes) can be done by broadcasting the floor to saturation (refusal)MVC-743S.JPG (114449 bytes).



Step 3: The transparent top coat, which is applied in one or more layers, determines the final thickness.

MVC-789S.JPG (225702 bytes)

As dazzling as the visual effect is, there is more to making a product successful. There are many factors contributing to the success of Epoxy.com Chip Flooring (Flake Flooring).pablack.jpg (135596 bytes)

Ease of Application

Many floor companies have difficulty finding good floor layers. The introduction of an easy-to-install product will be appreciated by everyone. The Chip Flooring (Flake Flooring) precludes processing mistakes. It is "fool-proof", because an excess of chips (flakes) are spread on the still wet floor paint. The extra chips are simply swept up after theMVC-738S.JPG (301739 bytes) floor has dried and can be reused. Taping off is unnecessary. The chips only adhere to the places where the flooring resin has been applied. This inherent simplicity is also the basis for the do-it-yourself product.

mbblue.jpg (226855 bytes)

Little Preparation

The standard preparation of a floor is necessary when using the Chip Flooring System. The chips cover small cracks and holes, because of the light structure and multi-color effect of the final result. Uneven spots are hardly noticeable.

Cove BaseMvc-266s.jpg (70740 bytes)

MVC-753S.JPG (232521 bytes)An integral cove base can be installed to turn your room into a virtual "bathtub". 

 

Easy to Disinfect

Mvc-269s.jpg (45582 bytes)The highest requirements apply, especially to floors with heavy traffic. The Chip Flooring System (Flake Flooring System) offers a finish which is very easy to keep disinfected. The seamless and sealed surface can be cleaned in every possible way. Even with a high pressure water spray. The seamless sealed surface prevents the entry of dirt and bacteria.  We can even add an optional anti-microbial to your Chip Flooring / Flake Flooring. vtgreen.jpg (215656 bytes)

Anti-skid

mvc-268s.jpg (61017 bytes)A floor made of Epoxy.com Flooring Chips (Flooring Flakes) are slightly textured and it is this texture that gives the floor good anti-skid qualities. This is especially important for areas where the floor gets wet such as entry ways, and pool sides.

Durable and ReparabilityMVC-801Sr.jpg (193982 bytes)

The use of Epoxy.com Product #315 provides a durability which can compete with similar types of decorative floors, with a much higher level of durability and reparability. Should the floor show scuffs after intensive use, this can be quickly solved by applying another layer of the transparent top coat. The floor looks new again after just one application.

Color-Fastdh6.jpg (182052 bytes)

Only the best color-fast pigments are used to produce color chips (color flakes). Even under exposure to strong ultraviolet light, hardly any fading occurs. Used with Epoxy.com Product #315 or other flooring resin that does not fade, the color chips create a strong, color-fast system.

 

Endless Choice of Colors and Effects

Epoxy.com Color Chips (Color Flakes) are supplied in many colors and different sizes. Making the right combination of colors creates extraordinary effects. This means that any requirement can be met. The thickness of the top coat can also be varied, yielding different appearance and anti-skid properties.

Proven Experience

Mvc-280s.jpg (33924 bytes)Epoxy.com can assist with it's large store of experience. Epoxy.com are Consultants, and Resin Compounders. Technical services are handled by the Owner's of Epoxy Systems, Inc. who each average over 25 years of field experience.

 

What Next?

For more information on the subject please go to Chip Flooring Installation Procedures for details on how to install chip flooring (flake flooring). 

Chip Flooring (Flake Flooring) can be modified for outside use, and in direct or intense sunlight.  Check out this Job History.
 

wolf grey 3s louis vuitton outlet sport blue 6s lebron 12 louis vuitton outlet coach factory outlet sport blue 14s louis vuitton outlet nike kd vii lebron 12 louis vuitton purses louis vuitton outlet sport blue 3s louis vuitton outlet Louis Vuitton Outlet michael kors outlet online cheap jordans louis vuitton outlet sport blue 6s cheap jordan shoes

Exclaim

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

 352-533-2167  Technical Support
                         Norm Lambert, President - Technical Support Director 
                         info@epoxy.com
  
352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

Website:  www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylate  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

 

[Home] [Catalog of Products [MSDS in Acrobat Format]  [Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter