CARVABLE POLYESTER WOOD FILLER
Fast Setting Easy to Use
Epoxy.com Polyester Wood Filler is a two component,
wood like polyester filler paste. Quick setting and easy to use. Epoxy.com
Polyester Wood Filler is designed primarily for wood repairs in
construction surfaces. Can be used to fill areas of deteriorated concrete (or
holes). Also used by model shops for making
permanent repairs, fillets, and design changes in the construction of all wood models and
patterns. Epoxy.com Polyester Wood Filler has excellent adhesion to
wood, fiberglass, and plaster and can be worked with standard woodworking tools in a quick
and convenient manner.
Waterfront Museum & the Circa 1914
Lehigh Valley RR Barge No. 79.
Photos Copyright Steve McGill
Used with permission all rights
Prior to application, area to be repaired should be roughened and thoroughly wiped
clean to ensure proper adhesion.
Thoroughly blend 100 parts resin (a golf ball size mass) with 2 parts (2" strip)
hardener for 1 1/2 minutes in a clean dry container carefully scraping sides and bottom of
container during the mixing process to ensure uniformity.
Epoxy.com Polyester Wood Filler should be applied by
"buttering" onto area to be repaired. After material has cured, the repair area
can be sanded to desired surface finish.
Epoxy.com Polyester Wood Filler should be stored at a temperature
less than 85 degrees F. Storage above 85 degrees F will shorten the shelf life and render
the product unusable. The shelf life for this product is one year.
For industrial use only. Keep away from children. Refer to Material Health and Safety
Data Sheet (MSDS form) pertaining to this product before using. Avoid contact with skin or
eyes. In the event of eye splash or contact, immediately flush with water for 15 minutes
and contact physician. If skin contact occurs, wash with mild soap and water. Prolonged or
repeated exposure may case skin and eye irritation. It is recommended that the user wear
impervious gloves and safety glasses with side shields. This information is presented in
good faith to assist the user in determining whether our products are suitable for his
application. No warranty or representation, however, is intended or made, nor is
protection from any law or patent to be inferred, and all patent rights are reserved.
|Mix Ratio||Resin to Hardener |
by wt. or vol.)
|100R to 2H|
|Viscosity or Consistency @77°F||ASTM D-2393||Thixotropic Paste|
|Pot Life (100 gram mass @77°F)||ASTM D-2471||4- minutes|
|Cure Schedule||@77 F.||12-15 minutes|
|Specific Gravity (g/cm)||ASTM D-792||1.04|
|Shore D Hardness||ASTM D-2240||55-60|
|Service Temperature (peak)||185°F|
|Water Absorption-24 hrs. @77°F (%) ||ASTM D-570||.18|
|Available Colors||Pine, Mahogany|