Epoxy.com Product #703

100% Solids Semi-Flexible Epoxy Adhesive

Epoxy Bonder | Epoxy Bonding Adhesive

DESCRIPTION

Epoxy.com Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder is a 100% solids, moisture insensitive epoxy resin system, containing no solvents. When mixed at a 2:1 ratio by volume, it produces a non-sagging material that is ideal for repairs on vertical or overhead surfaces. Product #703 Semi-Flexible Epoxy Gel Adhesive exceeds the requirements of ASTM C 881-87, Types I, II, and III Grade 3, Class "B", "C", "E" and "F". Epoxy.com Epoxy Gel Adhesive has Zero (0) VOC. Since it has no VOC it makes it safer to use, and meets even the strictest low VOC requirements

ADVANTAGES

Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder will bond to damp or dry surfaces.
Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder may be feather-edged and will not shrink.
Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder is readily dispensed into narrow slots and holes from cartridge dispensers, or concrete grout bags
Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder has excellent resistance to gasoline, oil, sewage and aggressive water.
Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder is 100% solids Epoxy
Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder has Zero (0) VOC
Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder meets ASTM C 881-87, Types I, II, and III Grade 3, Class "B", "C", "E" and "F"

PHYSICAL PROPERTIES

Gel Time @ 72? F (22.2? C) ? 2?	30 minutes minimum
Physical
Tensile Strength @ 72? F (22.2? C) (ASTM D 638)	5,000 p.s.i minimum (34.5 MPa)
Linear Coefficient of Shrinkage on cure (ASTM D 2566)	0.005
Compressive Strength (ASTM C 109 Modified)	11,000 + psi minimum (75.8 MPa)
Compressive Modulus (ASTM D 695)	200,000 + (1379 MPa)
Bond Strength (Slant Shear) (ASTM C 882-78)
7 days	3,000 psi minimum (20.7 MPa)
2 day moist cure	1,000 psi + (6.9 MPa)
14 day moist cure	1,500 psi + (10.3 MPa)
Electrical
Dielectric Strength, S/T	Volt per mil 440-465
Dielectric Constant	60 HZ 3.4 - 3.5
	10⁶ HZ 3.3 - 3.4
Power Factor	60 HZ 0.006 - 0.007
	10⁶HZ 0.03 - 0.04

Installation

SURFACE PREPARATION

For best results, areas to receive the Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder should be free of laitance, grease, oil, and any other contaminants that would inhibit bond. Sandblasting, waterblasting, or wire brushing, or dust free grinding for surface preparation are recommended. See Epoxy.com Surface Preparation Guide.

MIXING

Double Barrel Gun: With the use of static mixers in double barrel guns, no prior mixing is required.

Mixing: For large volume jobs to be mixed in 5 gallon pails or other suitable mixers where fillers such as Product #75 or other oven dry silica sands are used, for best results combine two parts by volume of Component "A" with one part by volume of Component "B" of Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder in a clean pail, using a slow speed drill and an Epoxy.com Mixing Paddle. Mix for a minimum of three (3) minutes to a uniform consistency. To obtain a mortar, slowly add a maximum of one part by volume of Product #75 Filler while continuing to mix.

COVERAGE

When used neat, a 3 gallon unit of Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder will cover approximately 80 square feet (7.4 m?) at a 20 mil thickness. You can also consult he Epoxy.com Neat (unfilled) Resin Calculator. When used as a mortar, a 3 gallon unit of Product #703, mixed with 3 gallons by volume of #75 Filler, will yield approximately 1,050 cubic inches of mortar. If using this as an anchor bolt, or dowel bar adhesive, you can double check you volume with the Epoxy.com Dowel Bar and Anchor Bolt Adhesive Calculator.

LIMITATIONS

Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder should not be applied when surface temperatures are below 40? F (4.4? C). For best results, do not exceed one part by volume of #75 Filler to one part by volume of mixed Product #703 Semi-Flexible Epoxy Gel Adhesive Bonder .

CAUTION: WARNING!

A Component contains epoxy resin. DANGER! B Component contains alkaline amines; strong sensitizer. May cause skin sensitization or other allergic responses. Use with good ventilation, particularly if it is heated or sprayed. Prevent all contact with skin and eyes. Wear protective clothing, goggles, gloves and/or barrier creams. Keep container closed when not in use. Wash thoroughly after handling.

FIRST AID: In case of skin contact, immediately wash with soap and water. In case of eye contact, flush with copious amounts of water for at least 15 minutes. Remove contaminated clothing and shoes. If irritation persists, seek medical attention. Wash clothing before reuse.

FOR INDUSTRIAL USE ONLY / KEEP AWAY FROM CHILDREN

Hit Counter

Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

352-533-2167 Technical Support
                         Norm Lambert, President - Technical Support Director
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625 Fax line to all Departments

Website: www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks

We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc. warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

[Home] [Catalog of Products] [Tech Data Sheets in Acrobat Format] [Epoxy.com MSDS in Acrobat Format] [Epoxy.com Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter

Epoxy.com Secure Login