Epoxy.com Product #695 BPO Hardening Posder for Epoxy.com MMAs

[Home] [Catalog of Products] [Where to Start] [Guide Specs][Installation Guides] [Blog Posts] [Bonding Adhesives] [Chip Floors Chemical Resistant] [Chemical Resistant Coatings] [Coatings] [Conductive Flooring] [Applications] [Elastomeric Decking Systems] [Epoxy Resin Systems] [Seamless Garage Floors] [High Temperature ] [Industrial Floors] [Injection] [Joint Systems / Sealants] [ Methyl Methacrylate (MMA)] [Mortars / Grouts] [Novolac] [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips] [Product Guide] [Wood Filler] [Who We Are] [Guide Specs]  [Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]  [Add this page to Favorites] [Contact UsPhone 352.489.1666

 

Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Epoxy.com Product #695

Methyl Methacrylate Hardener (Hardening Powder - BPO)


Description

Epoxy.com Product #695 Hardener Powder (BPO) for Epoxy.com MMA Flooring Systems is for use with Epoxy.com Products #691, #692, #693, #697, #698 & #699. Epoxy.com Product #695 Hardener Powder (BPO) for Epoxy.com MMA Flooring Systems dosing can be changed due to temperature and desired set time / working time. Epoxy.com Product #695 must be well mixed with Epoxy.com MMA before adding any other aggregates and fillers.  After mixing the Epoxy.com Product #695 Hardening Powder into Epoxy.com  MMA the polymerization reaction which leads to the hardening of the MMA begins.

Composition

Epoxy.com Product #695 is a white dry powder consisting of 50% BPO, Dibenzoylperoxide.

Technical Data

Appearance Sandy, white dry powder
Content of Dibenzoylperoxide and
Dicydohexlphtalate
Approximately 50%
Self-accelerating decomposition temperature    140°F
Self-ignition temperature >680°F
Solubility Not soluble in water

Packaging

1/2 pound Bagapproximately 10 Volume Ounces
5 pound 1gallon Pailapproximately 100 Volume Ounces
15 pound 3 gallon Pail    approximately 300 Volume Ounces
55 pound Boxapproximately 1,100 Volume Ounces

Use

Epoxy.com Product #695 MMA Hardener Powder must be mixed just immediately before the application of Epoxy.com MMA. All other powders and fillers must be added after Epoxy.com Product #692 and the Epoxy.com MMA resin have been well mixed together. A dosing chart is shown below.  Be sure to double check with the individual technical data sheets for the Epoxy.com MMA you are mixing with Epoxy.com Product #692.

Caution

Epoxy.com Product #692 is an oxidizing agent that violently decomposes under the influence of heat or when it comes in contact with deducing agents.  Do Not mix With Accelerators.  Store separately from Epoxy.com MMA resins.  Review MSDS information completely before using this or any other Epoxy.com Products.

Storage

Store in tight containers in dry environments below 80°F.

Mix Ratios

PRODUCT                                         SUBSTRATE/MATERIAL TEMPERATURE (°F) Epoxy.com Product #695 MMA Hardener (BPO)VOL OZ.PER GALLON OF RESIN
#691 MMA Primer 30°F 12.7
40°F 9.0
50°F 7.5
60°F 5.5
70°F 3.5
90°F 1.8
#692 MMA Flexible Membrane   40° F                                                       8.0
50°F 7.0
60°F 5.0
70°F 5.0
90°F 3.0-4.0
Epoxy.com #693 MMA                 40°F                                                        5.5
50°F 4.5
60°F 3.5
70°F 2.0
90°F 1.0-2.0
1 lb. by weight of Epoxy.com Product #695 equals approximately 20 volume ounces.

Information regarding Epoxy.com MMA resins and systems is based on extensive research and experience of the raw material manufacturer. By making such information available Epoxy.com does not thereby assume any liability beyond the express terms and conditions of our standard limited material warranty. Information is based on information that Epoxy.com believes to be correct, but Epoxy.com does not warrant the accuracy or completeness of any such information. We reserve the right at any time and without notice to update or improve our products and process and our information concerning the same. By Epoxy.com making this information available does not relieve the purchaser or user from his obligations to verify the suitability of our products and processes for the intended use or application.

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems,
Since 1980 - Over 33 years
Florida & Vermont
USA


Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12 Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylates  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are batched on an individual order basis. Unless authorized by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance] [Coatings] [Conductive Flooring] [Applications] [Elastomeric Polyurethane Systems] [Epoxy Resin Systems] [Seamless Garage Floors] [High Temperature Epoxy] [Industrial Floors] [Injection] [Joint Systems / Sealants] [Methyl Methacrylate (MMA)] [Mortars / Grouts] [Novolac] [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips] [Product Guide] [Wood Filler] [Who We Are] [Guide Specs] [Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form] [Add this page to Favorites]

7558709