[Epoxy Home] [Catalog of Products] [Where to Start] [Guide Specs] [Epoxy Installation Guides] [Blog Posts] [Epoxy Bonding Systems] [Chip Floors] [Chemical Resistant Epoxy] [Seamless Coatings] [Conductive Epoxy Flooring] [Crack Injection of Concrete & Wood] [Applications] [Elastomeric Polyurethane Systems]  [Seamless Garage Flooring Resins] [High Temperature Epoxy Resins] [Seamless Industrial Floors] [Joint Systems & Sealants] [Methyl Methacrylate MMA ] [Novolac Epoxy Resins] [Epoxy Mortars & Grouts] [Epoxy Novolac] [Primers Sealers] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Epoxy Installation Tips] [Who We Are]  [Epoxy Tech Data Sheets in Acrobat] [Product MSDS Sheets] [Online Order Authorization Form][Contact UsPhone 352.489.1666

  Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980Contact Us  


Epoxy.com Product #400

Two Component Chemical Resistant Urethane

This Technical Data Sheet is For Reference Only (for anyone who currently has unused product) Product #400 has been replaced by Product#402 or Product #406 - Component Low VOC Chemical Resistant Urethane Coating.


Epoxy.com PRODUCT #400 is a two component, chemical resistant, polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention. Epoxy.com PRODUCT #400can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangars, animal housing, and vehicle maintenance facilities. Available in both clear and pigmented formulations, Epoxy.com PRODUCT #400is used as a finish coating option for most Epoxy.com Flooring Systems.


bulletExcellent Abrasion Resistance
bulletExcellent Chemical & Stain Resistance
bulletSuitable for both Exterior & Interior Applications
bulletMay be used for both Horizontal & Vertical Applications


bulletSubstrate temperature must be a minimum of 50F
bulletSubstrate must be free of dirt, waxes, curing agents, and other foreign materials
bulletMinimum Application Temperature: 40F (contact Epoxy.com for Low Temperature Cure)
bulletMaximum Application Temperature: 100F


Two Component, catalyzed, chemical resistant polyurethane



Surface Preparation is the most critical portion of any successful resinous flooring system application. All substrates must be properly prepared as outlined in Epoxy.com TECHNICAL BULLETIN #100 which can be found at http://www.epoxy.com/concreteprep.htm . Epoxy.com Technical Service department is pleased to answer any questions.


Epoxy.com PRODUCT #400is normally applied with a brush, short napped roller, or squeegee and back-rolled with a short nap roller. Care should be taken to minimize the entrapment of air caused by over-rolling. Epoxy.com PRODUCT #400 can also be applied by airless or conventional spray.


Clean skin with soap and water. Tools and equipment should be cleaned with xylene or lacquer thinner.


Epoxy.com PRODUCT #400 will yield approximately 3 mils dry film when spread at 300 ft2 per gallon.


Epoxy.com PRODUCT #400 is available in Clear (gloss or satin) and 17 Standard Colors (http://www.epoxy.com/bgcolorchart.htm) or contact Epoxy.com for a color chart. Custom Colors are available subject to laboratory approval, minimum quantity, lead time for production, and increased cost.


Viscosity @ 75F

700-900 cps

Mixing Ratio

2 Parts A to 1 Part B by Volume

Solids Content (by volume)

56% (clear), 65% (pigmented)

Volatile Organic Content (VOC)

405 gm/L

Weight per gallon

10.5 pounds per gallon,mixed


Pot Life

8 hours @ 75F

Dry to Touch

10-14 hours @ 75F


12-16 hours @ 75F

Light Service

16 hours @ 75F

Full Cure & Maximum Resistance

5-10 days












  • Acetic Acid-5% L
  • Acetone L
  • Betadine R
  • Beer R
  • Bleach L
  • Brake Fluid R
  • Citric Acid-30% R
  • Citric Acid-40% L
  • Crude Oil R
  • Diesel Fuel R
  • Ethylene Glycol R
  • Fatty Acids L
  • Gasoline R
  • Hydrochloric Acid-15% R
  • Iodine R
  • Lactic Acid-15% R
  • Methyl Ethyl Ketone L
  • Nitric Acid-10% R
  • Orange Juice R
  • Peroxide-35% R
  • Phosphoric Acid-85% L
  • Skydrol R
  • Sodium Hydroxide-50% R
  • Sulfuric Acid-20% R
  • Toluene R
  • Urea R
  • Vinegar L
  • Xylene R

R-Recommended for continuous service. L-Limited Recommendation, occasional spills. *-May cause slight stain or discoloration


Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director

 352-533-2167  Technical Support
                         Norm Lambert, President - Technical Support Director 
352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

352-489-1625   Fax line to all Departments

Website:  www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright 1994-2014 (providing online information about the right product for the right job for 20 years) EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  (hereinafter known as "Supplier" warrants its products (when properly stored) for the period of time as follows: Epoxy one (1) year; Polyesters, Methyl Methacrylate  and Polyurethanes Six (6) months.  Supplier warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Supplier. If any product fails to meet this warranty, the liability of Supplier will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Supplier within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Supplier may in its discretion refund the price received by Supplier in lieu of replacing the material. No customer, distributor, or representative of Supplier is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Supplier. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Supplier reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. SUPPLIER'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND SUPPLIER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by us in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.


[Home] [Catalog of Products [MSDS in Acrobat Format]  [Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter