223 Sealer

[Home] [Catalog of Products] [Where to Start with Epoxy] [Bonding Systems] [Chip Floors] [Chemical Resistance] [Coatings] [Conductive]  [Elastomeric Polyurethane Systems] [Garage Floors] [High Temperature] [Industrial Floors] [Injection] [Joint Systems & Sealants] [Mortars / Grouts] [Methyl Methacrylate (MMA)] [Novolac Epoxy] [Polymer Systems] [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips][Wood Filler] [Who is Epoxy.com] [Guide Specs][FAQs] [Tech Data Sheets in Acrobat Format] [MSDS in Acrobat Format] [Online Ordering Authorization Form]
  Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980  

Epoxy.com Product #223

Water Based Curing Sealing and Bonding Agent

Low VOC Epoxy Sealer and Epoxy Bonding Agent

DESCRIPTION

EPOXY.COM PRODUCT #223 Water Based Curing Compound, Sealer and Bonding Agent is a two component water based epoxy curing that is used to both cure and seal concrete and to bond freshly placed concrete to existing concrete. For a pigmented version of this please see Epoxy.com Product #222 - Pigmented Water Based Epoxy Coating.

ADVANTAGES

  • Water based - Low V.O.C.
  • Excellent Adhesion to Damp Concrete
  • Prevents Intrusion of water, salts and chlorides
  • Easy to use 1 to 1 mix ratio
  • Can be brushed, rolled or sprayed
  • Long Pot life
  • No Reduction Needed For Spraying
  • Easy Water Cleanup
  • Good Chemical Resistance

WHERE TO USE

  • Freshly placed concrete curing and sealing
  • Stamped concrete curing and sealing
  • Acid stained concrete sealer
  • Concrete parapet wall sealer
  • Bridge pier cap sealer
  • Concrete floors sealer in food processing areas
  • Concrete counter top sealing
  • Sealer for other areas of concrete where curing is required with chemical resistant properties
  • As a bonding agent

PHYSICAL PROPERTIES

Color Clear (amber)
Mix Ratio 1 Part A to 1 part B by volume
Pot Life 4 hours at 75°F
Induction Time 15 minutes
Bond Strength 5000 psi
VOC Content1.16 Lbs / gallon
Water Loss, Average 0.039 kg/cm2, when tested in
accordance with AASHTO M 148
Adhesion Excellent to concrete, wood or steel
Viscosity 900 cps

SURFACE PREPARATION

Surfaces to receive EPOXY.COM PRODUCT #223 Water Based Curing Compound, Sealer and Bonding Agent may be dry or damp but do not apply in standing water. Before applying EPOXY.COM PRODUCT #223 Water Based Curing Compound, Sealer and Bonding Agent on freshly placed concrete surfaces, wait for bleed water or visible water sheen to evaporate. When used EPOXY.COM PRODUCT #223 Water Based Curing Compound, Sealer and Bonding Agent as a bonding agent, weak concrete surfaces and laitance should be removed by shotblasting or other suitable methods. Oil or tar should be removed before installation. See www.epoxy.com/surfaceprep.aspx. 

MIXING

Combine (1) one part by volume of Component "A" with (1) one part by volume of Component "B". Mix for a minimum of (3) three minutes with a low speed electric drill and a Epoxy.com Mixing Paddle. Allow 15 minutes for induction in a covered container before applying. Clean equipment with soap and water.

APPLICATION

EPOXY.COM PRODUCT #223 Water Based Epoxy Curing Compound and Sealer can be applied by brush, roller or spray. All spray equipment must employ traps to prevent unclean water and oil from contaminating the EPOXY.COM PRODUCT #223 Water Based Curing Compound, Sealer and Bonding Agent.

COVERAGE

EPOXY.COM PRODUCT #223 Water Based Curing Compound, Sealer and Bonding Agent will cover approximately 200 sq. ft. per gallon as a sealer, depending upon surface texture. As a bonding agent use at 75 to 100 sq. ft. per gallon.

CAUTION:

Society of the Plastics Industry (SPI) Classification (2) Warning for sensitization or other allergic responses. Avoid inhalation of vapor. Use good ventilation, particularly if the material is heated or sprayed. Prevent all contact with skin and eyes. Wear protective clothing, goggles, gloves and/or barrier creams.

Keep container closed. Use with adequate ventilation. Wash thoroughly after handling. FIRST AID: In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before reuse.

FOR INDUSTRIAL USE ONLY

KEEP AWAY FROM CHILDREN

Exclaim

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information on Epoxy.com Products please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

 352-533-2167  Technical Support
                         Norm Lambert, President - Technical Support Director 
                         info@epoxy.com
  
352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

Website:  www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright ? 1994-2013 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;  Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight  Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days.   Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com  within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com  SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

 

[Home] [Catalog of Products]  [Tech Data Sheets in Acrobat Format] [Epoxy.com MSDS in Acrobat Format]  [Epoxy.com Online Ordering Authorization Form] [Add Epoxy.com to Favorites]

Hit Counter

 

Epoxy.com Secure Login